Seat cowling (grp) stock shape race single, Honda VFR400 NC30
€242.66
Seat Cowling (GRP), NC30, Single, Stock Shape, Race
Stock shape seat cowling with taillight holes. Single seat, direct replacement for stock NC30 seat cowling in the same shape but with RC30 style single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad.
Please note:
for similar product but with taillight holes, please order BPFT-0121.
for similar product but with passenger seat pad area open, same as stock, and tail light holes order BPFT-0021
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFT-0221
SKU: hon-10492 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Tank cover, CBR125/CBR150/CBR250 2011 – CBR300 2014
€107.43
This lightweight and attractive real carbon cover will make your bike stand out from the crowd and fits in minutes.
TYGA no: BPCX-7108
SKU: hon-10168 Categories: ALL products, Carbon, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR300R 2014-, Honda, Shop, Various parts, Various partsHolder, Fork, 41mm
€35.93
This 41mm fork holding tool is very useful when servicing 41mm forks. Now there’s no need for alloy jaws in your vice and less chance of crushing a fork leg.
This handy tool just slips over the stanchion, secures with an M8 cap head bolt and then can be held firmly in the vice while you painlessly perform your maintenance.
Manufactured from 6063 aluminium to ensure no damage to your motorcycle parts in normal use
Carb Service Kit A, 32 pieces, Honda VFR400R NC30
€61.57
Carb Service Kit A, 28 pieces, Honda VFR400R NC30
LiteTek Carburettor Seal Kit to suit
Honda VFR400R NC30
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-003 Float Bowl Ring, Material: Flourosilicone (Part of Honda Kit 16010-MR8-505)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of Honda Kit 16010-MR8-505)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda Kit 16010-MR8-505)
4x OR-011 Float Bowl Vent O-Ring, Material: Viton 70A (Part of Honda Kit 16010-MR8-505)
4x OR-012 Fuel T-Pipe O-Ring, Material Viton 70A (Part of Honda Kit 16010-MR8-505)
4x CS-004 Choke Plunger Cap, Material: HNBR (Part of Honda Assy. 16046-MG9-681 or 16047-ML7-004)
TYGA no: CK-Honda-NC30
SKU: alg-10352 Categories: ALL products, Carburettor Service Kits,, Honda, Shop, Various parts, VFR400RR NC30Set, Pipe, Full Race System, Ninja 300R, Round Stainless Silencer
€557.94
2013-2017, Set, Pipe, Full Race System, Ninja 300R, Round Stainless Silencer
We now have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 300 when used with the TYGA system*. Made in stainless steel with spring mounted round Stainless silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an round Stainless silencer EXSL-0064
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0018.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 300 Exhaust pipe sections and silencers.
TYGA no: EXPS-0098
SKU: kaw-10070 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Carbon cover, rev. Counter 92mm, Honda
€32.14
Carbon cover set instrument surrounds, Honda
Theses covers fit snuggly over the original plastic Honda gauge covers and adds a sporty appearance. They are also ideal for hiding any ugly scratches or dents that may have occurred over the years. They fit in second and can be held in place with a dab of glue or silicone adhesive. Note, these covers are also available as separate covers.
This product is suitable for the following models:
MC18 NSR250
NC30 VFR400R
RC30 VFR750R
TYGA no: BPCC-0025
SKU: hon-10612 Categories: ALL products, Carbon, CBR400RR NC23, Honda, NSR250 MC18, Shop, Various parts, Various parts, VFR400RR NC30Passenger seat cover primer, Honda MSX125 GROM
€137.59
moet nog 502
TYGA no: BPFX-7128
SKU: MSX-10329 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopDisc gear 3rd & 4th z= 17-22 drive no.3, RGV250/RS250
€114.84
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl