Side cover left Blue, Honda MSX125 GROM
€39.31
Cover L Side, Blue
TYGA no: 83540-K26-900ZE
SKU: MSX-10223 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarb Service Kit, 12 pieces, Honda NSR250 MC28
€43.36
Carb Service Kit, 12 pieces, Honda NSR250 MC28
LiteTek Carburettor Seal Kit to suit: Honda NSR250 MC28
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x FB-032 Float Bowl Seal, Material: Flourosilicone (Part of Honda kit: 16010-KV3-950)
2x FB-033 Top Cap O-Ring, Material FKM (Part of Honda kit: 16010-KV3-950)
2x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KV3-950)
2x OR-014 Fuel T-Pipe O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KV3-950)
2x OR-012 Float Bowl Vent O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KV3-950)
2x CS-005 Choke Plunger Cap Material: Viton 70A (Part of Honda kit: 16046-KV3-950)
TYGA no: CKA-Honda-MC28
SKU: alg-10367 Categories: ALL products, Carburettor Service Kits,, Honda, NSR250, NSR250 MC28, Various partsKitaco “plug and play” wire harness for I-Map, Honda MSX125 GROM
€55.41
Kitaco “plug and play” wire harness for I-Map, Honda MSX125 GROM
Must be used with Kitaco I-Map 763-1432010 (MSX-10309)
TYGA no: 763-1432581
SKU: msx-10470 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopSeal, Gear Change Shaft, MC28
€8.00
Seal, Gear Change Shaft, MC28
TYGA no: 91202-444-023
SKU: hon-11115 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Aprilia RS250 Screen MKII(98-06)
€49.05
Aprilia RS250 Screen
This screen fits the original bodywork.
TYGA no: screenrs2
SKU: apr-10061 - apr-10062 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, Bodywork and carbon, RS250Carbon lower fairing stay, Szuki RGV250 Vj21
€70.24
Fairing Side Stay, Carbon, Set, RGV250 VJ21
These lower fairing stays are direct replacements for the Suzuki OE part numbers 94740-12C0-000 and 94750-12C0-000 on the VJ21 RGV250
Note: left and right are same in our set because the OEM ones are the same except the nut is on the outside (between fairing and stay) on the right side but on the back side on the left side.
So we supply one bush for left side to represent the thickness of the nut that is welded on the stay. On the right, it doesn’t need a bush.
TYGA no: BPCC-0059
SKU: suz-10137 Categories: ALL products, RGV250 VJ21, Shop, Suzuki, Various partsVHM piston (flat top) RS125 NX4 1995-’10 – RS250 NX5/NXA 1993-’10
€137.00
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: APHO12521750 + size
SKU: alg-10399 Categories: ALL products, Honda, RS250R NF5 / NX5, Shop, Various parts, VHM productsUpper/Mirror Stay, MC28
€128.33
Upper/Mirror Stay, MC28
TYGA no: 64503-KV3-950
SKU: hon-11140 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28