Silencer stainless round, WSS300 (street) system, KTM RC390
€384.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0074p
SKU: ktm-10145 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsCarbon Oil Pump Cover RGV250 VJ21/VJ22 Aprilia RS250
€24.73
This lightweight corrosion proof carbon cover replaces the nasty steel item that the bike is supplied with. It uses the stock mounting screws and can installed in seconds.
Fits Suzuki RGV250 VJ21/VJ22 and Apilia RS250
TYGA no: BPCC-0056
SKU: suz-10134 Categories: ALL products, Aprilia, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Various parts, Various parts, Various partsSeat cowling right VJ21, Suzuki RGV250 VJ21
€39.40
This seat cowling is to be used in our VJ21 kit, BPFS-0121 and BPFS-0122.
This product requires panels BPFT-9021H and L. for installation.
TYGA no: BPFT-9021R
SKU: suz-10103 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Exhaust set stainless steel, Honda NSR150
€346.46
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide, and we are now pleased to be able to offer their cylinder head for use on the NSR150SPThe VHM cylinder head is designed with removeable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (14.20cc)Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA T-shirt Never quit smoking black, Sizes: S to XXL
€24.05
TYGA T-shirt ” Never quit smoking” black, Sizes: S to XXL (alg-10234)
Part of our TYGA Performance Official Apparel collection of T-shirts exclusively designed by a young Australian designer, Morgan Driessens to represent our brand lifestyle and motorcycle choices. stand out from the crowd and make a statement!
BLACK T-SHIRT 100% Cotton 20 180gsm combed
*Large White Screen Print on front
*Small TYGA logo on the back
*Screen printed neck label
Available Sizes: S * M * L * XL * XXL
TYGA no: TMER-3003 S- XXL
SKU: alg-10234 S - XXL Categories: ALL products, Aprilia, Cagiva, Merchandise, Mito 125, Motocross, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RS125, RS250, RS250R NF5 / NX5, RSV125, Suzuki, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VHM products, Yamaha, YZ250 2005-15Section, Header, Stainless, CBR250R
€107.59
Section, Header, Stainless, CBR250R
TYGA no: EXPT-0015
SKU: hon-10870 Categories: ALL products, CBR250R 2011 - 15, Exhausts, Exhausts, Honda, Stock list, all modelsRacing stepkit silver/RED adjustable, Honda Monkey 2018
€477.27 €395.87
Racing Rear Set Kit, Adjustable, Monkey 125
With all major components designed specifically for the Monkey 125 in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners, new OEM Honda axle bolt and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items.
Notes:
No real brake light provision. If required, we recommend installation of inline pressure switch.
Fitting this rear set requires replacing the axle bolt with a slightly longer one, a new orginal OEM honda axle bolt is included
This rear set cannot be used in a reverse (GP) shift pattern
TYGA no: STAA-0027RED
SKU: msx-10416 Categories: ALL products, CNC parts, Honda, Monkey 125 2018-, ShopSide cowling B right (GRP), KTM RC125/RC200/RC390
€150.56
Side Cowling B, Right, Race (GRP), KTM RC125/200/390
This lightweight GRP side cowling replaces the heavier stock plastic item. Ideal for racing.
Must be used with:
BPFX-7231R TYGA Performance Side Cowling A, Right, Race (GRP), KTM RC125/200/390.
BPCX-7231R TYGA Performance Side Cowling A, Right, Race (Carbon), KTM RC125/200/390.
Our fairing has the same shape as the original KTM side cowlings, but we have made some updates on the product which makes it stronger and easier to instal.
The TYGA side cowling work together as a set, the original KTM fairing won’t fit the TYGA and vice versa.
When you want to order make sure you order A B.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFX-7331R
SKU: ktm-10049 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, Shop