Triple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 Forks to fit MC22
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3308
SKU: hon-11266 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersSeat cowling (GRP), stock shape race, Honda VFR750 RC30
€386.36
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
carbon rear hugger wide wheel, RVF400
€308.02
Rear Hugger (Carbon), RVF400 NC35, Wide Type, Assy.
New stylish design prevents water and road debris from the rear wheel reaching the rear shock and other components. Please note this model is designed specifically for the NC35 RVF400 fitted with a wide 160 section tyre whre the stock model hugger BPCH-7014 is too narrow. Note this product is not suitable for bodywork which uses the stock subframe such as the BPFS-0078 and all stock shaped rear ends where the rear fender may contact with the hugger. This product is sutable for NC35s fitted with TYGA RC211V and T13 Style bodywork kits which have a high style seat cowling with no fender for the hugger to fit in. Note we make similar products:
BPCH-7004, NC30 150/18 tyre size
BPCH-7014 NC35 150/17 tyre size
TYGA no: BPCH-7024
SKU: hon-10563 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopKitaco I-Map, Honda MSX125 GROM
€136.63
KITACO i-Map Fuel Injection Controller
Developed for the Honda MSX125 Grom, giving many choices of fuelling to suit different camshafts, exhausts and big bore engines. And a combination of these upgrades.
The different maps are selected by using DIP switches. Available setting are printed on the unit.
Fitting the i-Map to your MSX Grom requires splicing into the wire harness. Instructions can be seen here:
http://www.kitaco.co.jp/data/product/link/instaling_manual/imap_grom/kitaco_installing_manual_grom_imap.html
There is also the option of a custom map. However, this requires the use of the KITACO PC-USB Interface Cable (available separately).
Mapping :
Pre Installation of 3 Maps.
Remove the Limiter by fuel injection Cut features.
– Map 1 : Rpm limiter at 11000rpm, for stock engine
– Map 2 : Rpm limiter at 12000rpm, for stock engine with aftermarket exhaust
– Map 3 : Rpm limiter at 12000rpm, for 133cc bore up kit and aftermarket exhaust
– Map 4 : Full tuneable map with option USB controller and free Kitaco software. When delivered it is genuine map.
Fit on CE and US models
TYGA no: 763-1432010
SKU: MSX-10309 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopUpper cowling set GRP endurance Painted RR, Honda RVF400 NC35
€590.33
Upper Cowling Set, Endurance, (GRP) NC35, Painted RR
This Suzuka 8 Hour inspired cowling painted RR is supplied with four headlight covers, one pair in matching black and red and two in clear (yellow can be supplied instead of clear, see available options on the bottom of the page) The fairing uses the stock NC35 headlight and mounts to the bike in the same way as the Honda part including mirror stay, meter stay, mirrors, air duct, indicators etc. It can be used either with the TYGA lower cowling BPFL-0103 Painted RR, or can be used with stock Honda NC35 lower and inner cowling too. We also supply this product in carbon, unpainted and painted in RT colours ready to install. See our product list for the painted versions.
The windscreen is not included. Please order one of the following windscreens:
SCRE-0041
SCRE-0042
SCRE-0043
SCRE-0105
SCRE-0125
SCRE-0132
TYGA no: BPFS-0154 RR
SKU: hon-10642 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Seat set street Tyga doubleseat, NC30 kit
€748.25
Seat set street Tyga doubleseat, NC30 kit
Practicality
This seat cowling kit retains the stock NC30 sub frame and passenger seat so it is possible to carry a passenger as well as keep the luggage compartment. The kit re-uses the original Honda seat pads, locks and latch mechanism.
This kit is designed to give the NC30 a modern appearance while at the same time being a practical every day bike. The kit is supplied with all the mounting hardware and lighting and is straight forward to install with a stock machine as a starting point. Rear light LED.
The seat cowling keeps the tank in the stock position and the fuel cock is accessible.
Compatibility
This kit can be used with either stock Honda fairings or TYGA ones. If used with hon-10065 (as shown in the photos), some repositioning of the side stays is required because hon-10065 is designed for a slightly raised rear position on the fuel tank. For all other TYGA fairings, no modifications are required and the seat cowling kit can be installed without affecting the fairing.
This product is designed for the NC30. To use it with the NC35 is possible but it will require NC30 seats and some modification of the electrical component positions as well as stays for the front sub frame and tank mounting positions.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0078
SKU: hon-10067 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Screen clear “tall version’ TYGA style KTM, RC125/RC200/RC390
€52.00
Screen, KTM, RC series Upper Fairing
Replacement screen for KTM RC series Upper Cowling sets BPFS-0170 and BPFS-0171
TYGA no: SCRE-1163
SKU: ktm-10195 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200Turn signal Set black/blue, Honda RC30 style
€192.87
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPLT-0038
SKU: hon-11546 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist