Front fender grp, stock shape painted NC23 – NC29 – NC30
€123.95
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFF-0005rosswhite
SKU: hon-11398 Categories: ALL products, Bodywork and carbon, Carbon, CBR400RR NC23, CBR400RR NC29, Honda, Shop, VFR400RR NC30Set exhausts side by side stainless steel “mirror” , Yamaha RD350LC (4LO)
€702.49
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
TYGA no: EXCS-0044
SKU: yam-10051 Categories: 2 stroke exhaust sets, ALL products, Exhausts, RD350LC 4L0, Shop, YamahaKit, Fairing set (street) Stock shape 1989 Honda NSR250 MC18
€441.91
Kit, Fairing Set (Street), Stock Shape, 1989, NSR250 MC18
Consist of BPFU-9122 Upper Fairing,
BPFL-9122 Lower Fairing and a clear screen
TYGA no: BPFS-0173
SKU: hon-10920 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopSilencer, Stainless Moto Maggot, 43 mm., Ninja 250R, Assy.
€208.49
Same as EXSL-4013(p) but with mounting springs and spring hooks to weld on an existing system. designed to be used with Tyga Performance exhaust systems and other custom exhausts. Not suitable for stock Ninja system.
TYGA no: EXSL-4013
SKU: kaw-10084 Categories: 4 stroke exhaust sets, ALL products, Exhausts, SilencersSeat set street with carbon, Suzuki RGV 250
€837.41
One of our most popular TYGA bodykits from last years.
Designed for the Suzuki RGV250, but used on many bikes all over the world.
This set of bodywork comprises the parts shown below which are also available separately.
This kit is supplied with all additional fasteners required to mount it to a stock VJ22
If you have left and right exiting chambers (side by side) you will need to add 1 X TYLY-0029 to your order (Only one supplied in kit for twin right exiting chambers)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFS-0036
SKU: suz-10015 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiCarburettor Seal/Gasket Kit, MC21
€69.55
Carburettor Seal/Gasket Kit, MC21
Carburettor Seal/Gasket Kit, MC18, MC21
MC18/MC21 Carburettor Seal/Gasket kit.
1 Kit is for 1 Carburettor, so 2 kits needed for 1 bike
TYGA no: 16010-KM9-505
SKU: hon-11170 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC21Upper cowling race ,KTM RC125/RC200/RC390
€150.56
Upper Cowling, Race (GRP), KTM RC125/200/390
This lightweight GRP upper cowling replaces both the heavy and brittle clear front cowling and the black plastic part underneath to save weight, add strength and make for easy assembly. A must for anyone racing the RC390!
Note this product requires windscreen model SCRE-0163 or SCRE-0164 to complete the race conversion
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFU-7131
SKU: ktm-10042 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, ShopTYGA flywheel/RC valve remover, Honda NSR125/150/250/300
€135.99
This new, TYGA designed 2 in 1 combination tool is a flywheel puller and RC valve removing tool all in one handy package.
Saves space in your toolbox, and less clutter on the work bench.
How to use:
Familiarise yourself with the parts (see picture).
The tool is delivered ready for use as a flywheel puller. Just screw part D into the crank, then wind the (left hand) threaded main body (part A ) into the flywheel centre and pop the flywheel off by rotating part B clockwise. Part C is not used.
For removing the RC valve shaft remove part B completely and refit from the opposite end, screwing all the way home. Then slide in the part C . Position the tool over the valve shaft and wind part C onto the RC valve shaft (left hand thread). When fully home just rotate part B anti-clockwise to pull out the shaft. The RC valve shaft seal and E-clip will probably be damaged in the process, and should be replaced. Part D is not used.
22mm and 19mm spanners (not supplied) are required for correct operation.
*Note* This tool can be used on the NSR150 to remove the RC valve shaft, but will not fit the flywheel. Please use TYTO-0007 for this job.
TYGA no: TYTO-0014
SKU: hon-10329 Categories: ALL products, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Tools, Various parts, Various parts, Various parts, Various parts