Subframe aluminium , Honda RVF400 NC35
€493.97 €444.57
This lightweight aluminium subframe is closely modelled on the stock NC35 subframe and can be substituted for the heavy steel one with a weight saving of XXX. Made from extruded and CNC machined 6000 series aluminium, this product is hand-welded by our craftsmen to provide a strong, accurate and beautiful component. Finished in Hard wearing satin black powdercoating, it can be painted if the customer so chooses.
Note this subframe is for race and single seat use only and cannot be used for carrying a passenger. All mounting positions for exhaust stay, seat cowling, seat pad, undertray, radiator overflow bottle, electrical components etc which are normally mounted to the subframe are supplied with subframe, there are even two mounting holes in case you wish to install a remote reservoir rear shock (BPCC-0046 is a direct fit), so it is almost a simple plug and play. Most of the standard fasteners are used, however where necessary, replacements are included.
If you wish to run this subframe without the rear fender, then this is also possible and we recommend installing it along with Seat cowling bracket part number: TYLY-0224-17 and battery box TYLY-0026. In this configuration, you will need modify the rear mounts of the battery box and drill them to attach to the subframe and to cable tie, starter relay etc which are normally attached directly to the undertray
TYGA no: TYLY-0225
SKU: hon-10985 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, Various partsFairing set street T13, Honda RVF400 NC35
€982.48
Newly introduced for 2013, the T13 body kit has been designed to be both contemporary and stylish and provide an updated alternative to our popular RC211V kits. The GRP panels this kit uses are made from high quality epoxy resin which is both light and flexible. We also make the same kit but extensive use of carbon fiber, see BPFS-0116.
This set of bodywork requires modification of the NC35 including a tank cover, a meter stay and all the other components listed below which are also available separately.
*A clear screen is provided unless you specify tinted in the comment box at check out.
Please note some photos show the carbon version of this kit. The shape is identical to this kit.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0115
SKU: hon-10314 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopPower jet #0, for NSR250 MC18/21/28
€8.44
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: TPER-0005
SKU: hon-11236 Categories: ALL products, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various partsPainted Kit complete bodywork stock RT, “twin” Honda RVF400 NC35
€1,831.75
Seat Cowling, (GRP), NC30/NC35 GP-T
This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0148 (GRP, NC30)
BPFS-0149 (GRP, NC35)
BPFS-0150 (Carbon, NC30)
BPFS-0151 (Carbon, NC35)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T
TYLY-0133 Subframe, NC30/NC35 GP-T
TYLY-0130 Batterybox NC30/35 GP-T
BPFX-9234 Seat Support, NC30/NC35 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
TYGA no: BPFS-0212
SKU: hon-11394 Categories: ALL products, Bodywork, Bodywork and carbon, RVF400RR NC35Tail Lamp, Ninja 250R/300R 2013 -18
€34.14
Tail Lamp, Ninja 250R/300R 2013 -18
Lower Triple Clamp, CNC Black, CBR600RR Forks/NC30 Shaft
€367.66
Lower Triple Clamp, CNC Black, CBR600RR Forks/NC30 Shaft
CNC machined TYGA lower triple clamp for the VFR400R/NC30 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-MR7-003
Bearings: 91016-MR7-003
This product is also sold as part of a set
TYLY-1944 Triple Clamp Set, CNC Black, CBR600RR Forks to fit NC30.
RC Valve Cable A, NSR150SP
€13.73
RC Valve Cable A, NSR150SP
TYGA no: 14330-KW6-840
SKU: hon-11172 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR150SPStay, wire harness connector, Honda RS250R NXA
€4.64
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0322
SKU: hon-11384 Categories: ALL products, Honda, RS250R NF5 / NX5, RS250R NXA, Various parts