Piston Circlip 15mm, MC16~28
€1.05
Piston Circlip 15mm, MC16~28
TYGA no: 94601-15000
SKU: hon-11096 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28Tube, Carbon, Round, 98.5mm x 450mm
€144.72
Made from high TG resin and 2/2 weave twill carbon cloth, this replacement tube is suitable for the following TYGA Performance exhaust silencers. It is also suitable for other manufacturers’ silencers of the same dimensions. See below for exact specifications
Carb Service Kit A, 39 pieces, Honda CBR400RR NC23
€72.27
Carb Service Kit A, 39 pieces, Honda CBR400RR NC23
LiteTek Carburettor Seal Kit to suit
Honda CBR400RR NC23(G-H-J-K)
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-006 Float Bowl Ring, Material: Flourosilicone (Part of Honda Assembly Part No. 16010-MN4-003 superseded by 16010-MN4-305)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of Honda Assembly Part No. 16010-MN4-003 superseded by 16010-MN4-305)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda Assembly Part No. 16010-MN4-003 superseded by 16010-MN4-305)
6x OR-018 Vacuum Breather O-Ring, Material Viton 70A (The parts book lists the part number for the vacuum o-rings as being part of the kit 16040-MM5-601. However, that kit only contains the o-rings for the fuel tubes and float bowl breather tee pieces. Therefore, we have added these o-rings to the kit)
4x OR-011 Float Breather O Ring, Material: Viton 70A (Part of Honda Assembly Part No. 16040-MN4-003 superseded by 16040-MM5-601)
6x OR-016 Fuel O-Ring, Material: Viton 70A (Part of Honda Assembly Part No. 16040-MN4-003 superseded by 16040-MM5-60)
4x CS004 Choke Plunger Cap, Material: HNBR (Part of Honda Assembly Part No. 16046-KT8-003 or 16046-KY2-711)
3x SC-008 Throttle Synch Screws, Material: Stainless Steel
TYGA no: CKA-Honda-NC23
SKU: alg-10357 Categories: ALL products, Carburettor Service Kits,, CBR400RR NC23, HondaCrankcase covers CNC, Honda MSX125 GROM
€317.88
moet nog 501
TYGA no: APK2611370TA
SKU: MSX-10196 Categories: ALL products, Honda, MSX125 2013 - 2015, Shop, Various partslower cowling stock shape closed bottom , Honda RFV400 NC35
€180.47
Race one piece lower cowling with oil catch tank. Direct replacement for OEM Honda lower left, right and inner cowls. Can be used with most of our range of upper cowlings.
TYGA no: BPFL-0106
SKU: hon-10710 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Brembo Gold 84mm cast Caliper
€156.80 €139.28
Brembo Gold 84mm cast Caliper
These calipers are used on many European bikes, easy to install and give good quality for money.
Together with our TYGA bracket conversion it will update your bike to todays standard.
34mm pistons, bleed screw and banjo are reversible.
Order with trust.
TYGA no: 20.6951.46
SKU: alg-10253 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ22, RGV250 VJ23, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, Various partsTriple Clamp Set, 3D, CNC Silver, NC35 Forks to fit MC21/MC28
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3305
SKU: hon-11270 Categories: 4 stroke exhaust sets, ALL products, CNC parts, CNC parts, Exhausts, Honda, NSR250 MC21, NSR250 MC28, Shop, SilencersDecal set, type 3 Pearl valentine red scheme, Honda MSX125 GROM
€46.17
Decal Set, MSX125, Type 3, 2013 Pearl Valentine Red Scheme. This set comprises of a complete set of all the OE Honda decals required for the painted panelson the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets.
TYGA no: STIC-0026R
SKU: MSX-10115 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop