Clutch Pressure Plate, MC28 SP
€59.69
Clutch Pressure Plate, MC28 SP
TYGA no: 22351-KV3-780
SKU: hon-11151 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Fuel Tank, Carbon, VFR400 NC30
€1,444.49
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPCG-0005
SKU: hon-11228 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30RC valve cable kit, 300cc big bore
€42.63
RC valve cable kit for the 300cc big bore kit.
2x Lower cylinder cables.
TYGA no: TPER-0035
SKU: hon-10835 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Toe piece
€12.22
Replacement toe piece for your TYGA Step Kit.
Can also be used for fitting to almost any standard foot control lever to replace bent and damaged part by simply drilling a 6.3mm hole and countersinking on the back side of the lever.
Use Loctite to secure.
Comes with mounting bolt.
TYGA no: STAT-0001
SKU: alg-10042 Categories: ALL products, Aprilia, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, KTM, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RS125, RS250, RS250R NF5 / NX5, RVF400RR NC35, Shop, Steps, Steps, Suzuki, Various parts, VFR400RR NC30Athena gasket kit complete set, Honda NSR250 1990 – 96
€65.29
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: P400210850268
SKU: alg-10417 Categories: ALL products, High performance, High performance, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsRod M6 rightd.
€14.78
Replacement rode end joint for your TYGA Step Kit.
M6 RH F. Rod End SIBP6S
TYGA no: STRE-0006
SKU: alg-10040 Categories: ALL products, By model, CNC parts, Hawk/Bros 400/650, Honda, Kawasaki, Ninja 400R 2018-, ShopSet exhaust pipe with stainless steel silencer, Yamaha R25/R3
€765.52
Set, Exhaust Pipe, Race System, Yamaha R25/R3, Stainless, Round Aluminium Silencer
This race system has been specifically developed for the Yamaha YZF R25 and YZF R3 and has been designed for optimum performance. It uses a stainless oval silencer with carbon end cap to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatiblity
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
No modification of bodywork is required, however, the emission canister must be relocated using the clamp provided.
Please also see EXPS-0072 EXPS-0073 and EXPS-0075 for similar system.
Performance and Dynograph
Please refer to dynographs
A) All Standard.
The standard exhaust system is replaced with the TYGA system. No modifications to the engine or fuelling were performed. Fitting a fuel controller could further increase the performance gains.
B) Airfilter/Airbox modification.
The standard exhaust system is replaced with the TYGA system. The airbox cover has been removed and a high flow filter fitted. This improves power all through the range. Fitting a fuel controller could further increase the performance gains.
TYGA no: EXPS-0074
SKU: yam-10061 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Yamaha, YZF-R25/R3Axle Slider Kit, (Orange/Black) KTM RC and Duke Series
€51.61
Axle Slider Kit, (Orange/Black) KTM RC and Duke Series
This kit is specifically designed for the KTM racer in mind. The axle sliders have been designed to help protect your bike in the event of a crash. Easy to install and look cool too in KTM orange and black.
Now you really are ready to race!
Included in this kit are the following components:
1 x left side front axle slider
1 x right side front axle slider
1 x left side swing arm mount slider
1 x right side swing arm mount slider
TYGA no: TPER-2004
SKU: KTM-10079 Categories: ALL products, CNC parts, CNC parts, CNC parts, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 125/200, RC 390