TYGA / Kitaco Power up kit carbon , Honda MSX125 GROM
€750.67 €675.60
TYGA/KITACO Power Up Kit, Carbon Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0041 Set, Pipe, Full Race System, MSX125 Grom, Carbon Oval/Carbon End Cap
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA no: TPER-0095
SKU: MSX-10305 Categories: ALL products, Exhausts, Exhausts, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopSide cover left black, Honda MSX125 GROM
€39.31
SIDE COVER LEFT BLACK, HONDA MSX125 GROM
Headlight unit, Honda MSX125 GROM
€67.83
Headlight Unit Complete
TYGA no: 33110-K26-901
SKU: MSX-10006 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop, Universal partsTop Triple clamp CNC black , Suzuki RGV 250
€218.46
CNC machined TYGA top triple clamp ( without detachable key holder for race use) for your RGV250 VJ22.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch holder can be ordered separately or together with this product as set TYLY-1046.
TYGA no: TYLY-1046(p)
SKU: suz-10056 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiCarbon seat cowling passenger, KTM RC125/RC200/RC390
€300.99
Seat Cowling, Passenger, (Carbon), KTM RC Series
This lightweight seat cowling is the same shape as the stock foam passenger seat but being made of carbon is much lighter. As well as the weight saving, it adds style and individualism to your ride and can be installed in minutes.
This product is supplied with all mounting hardware.
Let your KTM RC stand out from the crowd this beautiful carbon product.
TYGA no: BPCT-7231
SKU: ktm-10066 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, KTM, RC 125/200, RC 390, ShopLower Cowling (GRP), NSR250 Tyga, Race, Stock Shape, Assy.
€228.48
Stock shape, race lower cowling for the MC21 and MC28.
This part is a direct replacement for OEM Honda left, right lower, right mid and inner cowls and has the ‘shark fin’ and front ducts filled in as well as extra clearance for the exhaust chamber where it exits on the rear right lower side. Compatible with stock and Tyga exhaust systems.
Compatible Parts:
Can be used with the following upper cowlings. MC21 and MC28 OEM upper cowling, Tyga upper cowlings: BPFU-0001, BPFU-0002, BPFU-0003, BPFU-0006, BPFU-0007, BPFU-0008 and BPFU-0022
See also
BPFL-9001 for similar product
TYGA no: BPFL-0001
SKU: hon-10236 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopThrottle Cable, Open, Ninja 250R 2008 -12
€15.30
Throttle Cable, Open, Ninja 250R 2008 -12
TYGA no: 54012-0293
SKU: kaw-10209 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopTop Triple Clamp, CNC Black, CBR600RR forks / NC30 Shaft
€196.92
Top Triple Clamp, CNC Black, CBR600RR forks / NC30 Shaft
CNC designed and manufactured in house. Facilitates mounting holes for securing the ignition switch holder assy TYLY-1144
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.