DB-killer for stainless exhaust 2 inch
€28.57
Decibel Killer, Silencer, Stainless, 2 Inch
This decibel killer is designed to reduce the noise from TYGA exhausts with 2 inch tail pipes. Suitable for the following models:
EXSL-0017 SUS Oval
EXSL-0040 Silencer, Aluminium, Round, 2 x 380 mm.
EXSL-0047 Silencer, Aluminium, Round, 2 x 450 mm.
It will also physically fit the following silencers, but it should not be used with any carbon silencer due to extreme heat buildup. If you like the designs below and would like the DB killer then please request that the silencer be made with stainless steel sleeve instead of carbon. We will advise on price (Stainles version of silencers below inclusive of db killer included will be less expensive than the carbon version excluding the db killer)
EXSL-0012
EXSL-0016
EXSL-0022
EXSL-0023
TYGA no: EXDK-0003
SKU: alg-10226 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30Rear Stand Bobbins, Black, Ninja 400, Assy.
€22.13
Rear Stand Bobbins, Black, Ninja 400, Assy.
For Kawasaki Ninja 400
TYGA no: TYLY-1160
SKU: kaw-10093 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 400R 2018-, Various partsCarbon tankcover rear, 696/795/796/1100
€104.35
Tank Cover, Rear, (Carbon), Ducati Monster
Bikini fairing (GRP) black Honda MSX125 GROM
€114.68
Bikini Fairing (GRP), MSX125 Grom
This bikini fairing is uniquely designed to blend with the stock bike’s styling and neatly integrate the headlight unit with the instrument cluster. Available in GRP shown here and also in carbon (see BPCU-7128). This unit can be installed on completely stock bike or with other TYGA products as shown in the photo.
Available in OE Honda colours to match your bike.
TYGA no: BPFU-7128 B
SKU: MSX-10211 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopCarbon front fender “stock type” , Honda VFR750 RC30
€231.20
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Carb Service Kit, 12 pieces, Honda NSR250 MC28
€43.36
Carb Service Kit, 12 pieces, Honda NSR250 MC28
LiteTek Carburettor Seal Kit to suit: Honda NSR250 MC28
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x FB-032 Float Bowl Seal, Material: Flourosilicone (Part of Honda kit: 16010-KV3-950)
2x FB-033 Top Cap O-Ring, Material FKM (Part of Honda kit: 16010-KV3-950)
2x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KV3-950)
2x OR-014 Fuel T-Pipe O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KV3-950)
2x OR-012 Float Bowl Vent O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KV3-950)
2x CS-005 Choke Plunger Cap Material: Viton 70A (Part of Honda kit: 16046-KV3-950)
TYGA no: CKA-Honda-MC28
SKU: alg-10367 Categories: ALL products, Carburettor Service Kits,, Honda, NSR250, NSR250 MC28, Various partsStud, Exhaust 8×22, MC21/28
€1.96
Stud, Exhaust 8×22, MC21/28
TYGA no: 92900-080220B
SKU: hon-11088 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Clamp manifold, VFR750F gen 3 and 4, 90-97
€17.06
Clamp manifold, VFR750F gen 4, 94-97
Clamp manifold used on:
EXPS-0119 Set, Pipe, Full Race System, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
TYGA no: EXMC-0119
SKU: hon-11031 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97