Silencer oval stainless steel with carbon cap, Honda MSX125 GROM
€288.13
Silencer, Stainless, Oval/Carbon End Cap, Spring Mount, MSX125 Grom, No Fittings
TYGA no: EXSL-1142(p)
SKU: MSX-10280 Categories: ALL products, Exhausts, Exhausts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopRubber ram airbox, Honda RS250 NX5
€9.13
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0221B
SKU: hon-11382 Categories: ALL products, High performance, Honda, RS250R NF5 / NX5, Various partsSeat cowling with carbon assy, Honda NSR250 MC28
€363.28
We now make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. This product includes ONLY the seat cowling for replacement in the event of an accident or to use on a model other than the MC21 or MC28. For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
Tyga Performance Compatible Parts for this Product:
This product should be used with:
TYLY-0007 Subframe
TYLY-0006 Battery Box
BPSP-0001A Seat Pad
BPAC-0001 Rear Brake Reservoir Kit,
And also as well as the above on street versions:
BPLT-0008 LED Taillight
BPFX-9006 Registration Plate Holder
TYGA no: BPFT-9012Â
SKU: hon-10347 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, NSR250 MC28, ShopCarbon upper cowling race ,KTM RC125/RC200/RC390
€300.99
Upper Cowling, Race (Carbon), KTM RC125/200/390
This lightweight carbon upper cowling replaces both the heavy and brittle clear front cowling and the black plastic part underneath to save weight, add strength and make for easy assembly. Finished in tough UV resistant clearcoat, no need to paint. Install and ready to use! A must for anyone racing the RC390!
Note this product requires windscreen model SCRE-0163 or SCRE-0164 to complete the race conversion
Update your bike with this great TYGA performance, KTM power part!!
TYGA no: BPCU-7131
SKU: ktm-10043 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, KTM, RC 125/200, RC 390, ShopFairing stay front Gp-T, Honda RVF400 NC35
€33.99
Fairing Stay, Front, NC35, GP-T, Assy.
This stay mounts to the stock Honda NC35 meter stay and allows for fitment of the upper fairing BPCU-9034 and BPFU-9034. Supplied complete with plastic bung for quick fairing assembly and removal.
Compatible Parts
TYGA upper cowlings, BPFU-9034 and BPCU-9034.
TYGA no: BPSY-0188
SKU: hon-10588 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, RVF400RR NC35Seal, Countershaft, MC28
€13.35
Seal, Countershaft, MC28
TYGA no: 91204-MG3-003
SKU: hon-11108 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Set, pipe full race system round carbon silencer RH exit, VFR750F gen 4, 94-97
€1,373.19
Set, pipe full race system round carbon silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: EXPS-0135
SKU: hon-11043 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97 Tag: Exhaust systemsSubframe, GP Race Tail, NSR250, Assy.
€123.00
This strong but lightweight subframe replaces the stock item when used as part of the NSR250GP Race Tail kit. Essential for mounting the seat cowl, this component is supplied with all brackets and mounting points to substitute this for the OEM Honda item. Supplied with a lightweight undertray and stainless steel bolts to attach the tank and regulator/rectifier as well as cable ties for securing the wiring.
Compatible Parts:
Only to be used with NSR250 GP Race Tail kit, BPFT-9002 MC21 seat cowl, BPFT-90012 MC28 seat cowl, subframe TYLY-0007, battery box TYLY-0006, seat pad BPSP-0001, Taillight BPLT-0008 and plate holder BPFX-9006, recommend BPAC-0001 rear brake reservoir kit
TYGA no: TYLY-0007
SKU: hon-10827 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, NSR250 MC28