Carbon holder brake hose "NSR500V style), NSR250 MC28 – NC30 – NC35
€45.78
Holder, Carbon, Brake Hose, NSR500V Style
This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.
It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.
Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.
TYGA no: BPCC-0051
SKU: hon-11203 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC28, NSR500V NX6, RS250R NF5 / NX5, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Chain slider , Honda RS250 NX5
€57.13
Replaces Honda/HRC part number 52170-NX5-000, fits top and bottom, for complete swingarm please order 2 pcs.
TYGA no: TYLY-0140
SKU: hon-10685 Categories: ALL products, By model, By product, Carbon, Honda, RS250R NF5 / NX5, Shop, Various partsSilencer carbon round slip on , CBR250RR MC22
€381.35
This easy to fit bolt on silencer replaces the stock heavy aluminium one. Constructed from lightweight carbon fibre with stainless steel exit cap, and aluminium mount cap, it fits in minutes using the original hardware. Stainless steel mounting clamp is provided when you purchase this product.
Note, this silencer may not be legal for some states and territories
TYGA no: EXSL-0016
SKU: hon-10217 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersSilencer stainless round, WSS300 (street) system, KTM RC390
€384.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0074p
SKU: ktm-10145 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsCarb Service Kit A, 20 pieces, Honda CB400 Super Four NC31
€40.95
Carb Service Kit A, 20 pieces, Honda CB400 Super Four NC31
LiteTek Carburettor Seal Kit to suit
Honda CB400 Super Four NC31
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-012 Float Bowl Ring, Material: Flourosilicone, (Part of Honda Assembly Part No. 16010-MY9-000)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MY9-000)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MY9-000)
4x OR-006 Needle O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MY9-000)
Fuel Tap / Pet Cock, MC28
€103.58
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: 16950-KV3-953
SKU: hon-11272 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250 MC28, ShopSeat set race, aluminium subframe, Suzuki RGV 250
€698.64
One of our most popular TYGA bodykits from last years.
Designed for the Suzuki RGV250, but used on many bikes all over the world.
This set of bodywork comprises the parts shown in the picture which are also available separately.
It is supplied with all additional fasteners required to mount it to a stock VJ22.
If you have left and right exiting chambers (side by side) you will need to add 1 X TYLY-0029 to your order (Only one supplied in kit for twin right exiting chambers)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFS-1037
SKU: suz-10212 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiCarbon cover for exhaust outlet , KTM RC390
€108.71
Cover, Exhaust Outlet, (Carbon), KTM RC390
This cover fills the outlet hole left in the stock belly pan after installation of an under seat or similar exhaust. Easy to install, supplied with mounting hardware and painted white to blend in.
TYGA no: BPCC-7431
SKU: ktm-10070 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Exhausts, KTM, RC 390, Shop