Silencer stainless round, WSS300 (race) system, KTM RC390
€406.03
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0174
SKU: ktm-10148 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsRear sprocket aluminium gold, Aprilia RS250
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0106-38T -TYSR-0106-44T
SKU: apr-10050 - apr-10056 Categories: ALL products, Aprilia, By product, RS250, Sprockets, SprocketsCarbon rear hugger/chain guard, Kawasaki ZXR250 2008- 12
€331.09
Rear Hugger/Chain Guard (Carbon), Ninja 250R
Ideal for keeping road dirt and rain away from the rear shock and underside of your Ninja. Styled to look in keeping with the design of the bike. Easy to install.
TYGA no: BPCH-7016
SKU: kaw-10046 Categories: ALL products, Carbon, Kawasaki, Ninja 250R 2008- 12, ShopSub-frame (TYGA), Suzuki RGV250 VJ22
€143.58
This subframe is a replacement for the stock Suzuki item and to be used in our TYGA seat cowling kits BPFS-0036, BPFS-0037, BPFS-0038 etc. and bolts up to the VJ22 frame without need for modifying any components. It will not fit the stock Suzuki seat cowling.
The subframe is supplied with all the fasteners needed to mount the various components that are housed under the seat cowling and incorporates a battery tray. This product is made in steel but is much smaller than the stock one and weighs much less without compromising strength.
Not to be used on a motorcycle carrying a passenger and rider.
This subframe is only compatible with the TYGA rear seat, the original seat cowling won’t fit.
TYGA no: TYLY-0028Â
SKU: suz-10089 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, RGV250 VJ22, Shop, Suzuki, Universal partsSilencer, Carbon/Kevlar, Two Stroke, 70mm, Assy
€151.18
Silencer, Carbon/Kevlar, Two Stroke, 70mm, Assy
This high quality lightweight silencer is made from CNC machine entry and pressed stainless steel exit cap joined by a carbon/Kevlar fiber tube. It is designed very similar to the ones we make for the NSR500V but is a direct fitment for our 250V style chambers and provides the same power characteristics as our other two stroke silencers. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
"Note this product is intended to be used with our exhaust chambers (EXCS-0047) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber."
Compatible Products:
Tyga Performance Two Stroke chambers sets EXCS-0047. (We will be adding more to this list as we get the chance to install with other previous TYGA exhaust systems, Feel free to request advice by email about suitable applications) Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0083 carbon
TYGA no: EXSL-0084
SKU: hon-11047 Categories: ALL products, Exhausts, High performance, Honda, NSR250, NSR250 MC28Upper Cowling Race (GRP), MC18, GP-T, Assy.
€257.70
Upper Cowling Race (GRP), MC18, GP-T, Assy.
Stylish replacement fairing designed in-house by TYGA Performance to give the MC18 NSR250 a contemporary look. This upper cowling is for our race version of the GP-T MC18 kit and has no headlight holes. Together with lower cowling BPFL-9035 and other mounting hardware it comprises set BPFS-0158
This cowling is supplied with a plastic bung to mount to the meter stay.
Compatible parts:
BPFL-9035 Lower Cowling
TYLY-0121 Upper Stay
TYLY-0154 Meter Stay
BPSY-0143A Side Stay Kit
TPER-0013 Steering Stopper
SCRE-0161 Screen, Clear GP-T, or SCRE-0162 Screen, Tint GP-T
Carbon rear seat, Aprilia RS250
€773.53
This seat cowling is to be used in our Aprilia RS-250 kits, BPFS-1102.
This product is compatible with Sub frame TYLY-0065. Will not fit stock Aprilia subframe
TYGA no: BPCT-9030
SKU: apr-10071 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopComplete Seat set T9, Honda CBR400RR
€475.78
This set of bodywork comprises the parts shown in the picture which are also available separately.