Screen clear “tall version’ TYGA style KTM, RC125/RC200/RC390
€52.00
Screen, KTM, RC series Upper Fairing
Replacement screen for KTM RC series Upper Cowling sets BPFS-0170 and BPFS-0171
TYGA no: SCRE-1163
SKU: ktm-10195 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200key holder CNC black, Suzuki RGV 250
€121.39
Ignition Switch Holder, CNC Black, Suzuki RGV250 VJ22
This is a removable ignition switch/lock holder for our Suzuki RGV250 VJ22 top triple clamp. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-1046.
TYGA no: TYLY-1146
SKU: suz-10058 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiSilencer aluminium round /carbon end cap 380mm (4 stroke) 2
€271.40
Silencer, Aluminium/Carbon End Cap, Round, 2 x 380 mm., Assy.
This silencer has a tough anodized aluminium tube and carbon exit cap for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0140
SKU: alg-10136 Categories: 4 stroke exhaust sets, ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30, VFR750F Gen 4, 94-97Carbon fuel tank (early type), Honda RS250R NX5
€1,444.49
Fuel Tank, Carbon, RS250R NX5 (Early Type)
Top quality reproduction of the early non ram air version NX5 fuel tank in carbon fiber.
Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel, Avgas 100LL to E85 (85% ethanol). Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light ( 2.25 kg) Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts and following the stock shape, the following stock parts can be used (not included):
Fuel Cock
Breather
Front strap
Stock mounting rubbers
Filler cap and seal
IMPORTANT: Please note that this fuel tank, for ease of manufacture, uses the later flush fitting NX5 type filler cap. This can be purchased from HRC (part numbers 17521-NX4-680 for filler cap and 17515-NX5-770 for seal) or we can supply our own TYGA version (Cap: TYLY-0178A, Seal: BPSY-0238) Note the filler cap and the above list of parts are not included with the fuel tank and needs to be purchased separately.
TYGA no: BPCG-0003
SKU: hon-10946 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon Number board miniRacerXtreme, Honda MSX125 GROM
€65.29
Number Board, (Carbon) MiniRacerXtreme, MSX125 Grom
This product fits over the front of the fairing on the MiniRacerXtreme to tranform the fairing from street to race. Easy installation and can be used with or wothout the headlight installed.
Hi Flo reeds (set) assy, Honda NSR250 MC21/MC28
€128.63
Complete set of reeds for your Honda NSR250 MC21 MC28, for that extra performance and throttle response.
Kit includes:
– HRC style stuffer for improved intake mixture flow.
– Reed stopper lifter plates to increase intake area for increased peak performance and over-rev.
– Genuine Honda reed valve gasket
Please order one set per engine.
Included parts: 2 x Reed valves complete, reed valve gasket.
Graph compares MC21 before (red line) and after (blue line), Hi Flo reed valve stuffers and carbon reeds fitted.
TYGA no: TPER-0001
SKU: hon-10324 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopTrottle cable A, Honda NSR250 MC21
€68.40
Throttle Cable A, MC21
TYGA no: 17910-kv3-830
SKU: hon-10706 Categories: ALL products, Honda, Honda OEM products, NSR250, NSR250 MC21, Various partsCarbon exhauststay left, Suzuki RGV 250
€29.88
Carbon Exhaust hanger stay for RGV250. This product is used to secure the left side silencer for systems with a side by side silencer. It can be used with or without the passenger footpeg assembly so it is suitable for both street and race bikes
Compatible with the following TYGA exhaust systems:
EXCS-0009
EXCS-0014
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCC-0012L
SKU: suz-10004 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, Suzuki