Stay oval silencer, Honda MSX125SF GROM
€20.41
Stay, Silencer, High Level Exhaust, MSX125
This product allows for the use of a TYGA Performance high level full race system with the 2016 second generation MSX125SF Grom. Some small modification to the rear fender is required to allow for installation, but once installed, the stay is neat and tidy and unobtrusive. This product is suitable for, and included with, the following model exhausts:
EXPS-0066 Set, Pipe, Full Race system, MSX125SF Grom, Carbon Oval/Carbon End Cap
EXPS-0067 Set, Pipe, Full Race system, MSX125SF Grom, Stainless Oval/Carbon End Cap
Note: This product can be ordered individually and used for customizing your bike with any high level exhaust. See also similar product BPSY-0175 which has the mounting holes further forward and is used with our Maggot full race system EXPS-0065.
TYGA no: BPSY-0177
SKU: MSX-10341 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, ShopCarbon Headlight cover, Honda MSX125SF GROM
€191.76
Carbon Headlight cover, Honda MSX125SF GROM
Fits over nasty the plastic stock item and transforms the appearance of your bike. Installs in minutes.
This product let’s your MSX125SF GROM stand out from the crowd
TYGA no: BPCU-7228
SKU: MSX-10370 Categories: ALL products, Bodywork and carbon, Honda, MSX125SF 2016 -2020, ShopRubber ram airbox, Honda RS250 NX5
€9.13
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0221B
SKU: hon-11382 Categories: ALL products, High performance, Honda, RS250R NF5 / NX5, Various partsBrakereservoir cap, nissin
€58.86
This anodised CNC machined reservoir cap replaces the stock Nissin cap (Pt #45513-KV3-006, used on many models). We provide a range of colours as well as this colour.
Suitable for most Honda sports bikes that have a remote mounted reservoir for the front brake master and have a two bolt mounting arrangement. (Not suitable for threaded type caps.)
This product will fit:
NSR250 MC18, MC21, MC28
CBR400RR NC23, NC29
VFR400R NC30
CBR900RR SC28
VFR750 RC30
etc
May be suitable for other makes too.
TYGA no: TYLY-1049 - TYLY-4049
SKU: alg-10060 - alg-10064 Categories: ALL products, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, NSR250 MC18, NSR250 MC21, NSR250 MC28, VFR400RR NC30Tank Filler Cap Breather Rubber, MC28
€11.45
Tank Filler Cap Breather Rubber, MC28
TYGA no: 17646-MN8-700
SKU: hon-11167 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Carbon Air duct “satin” (pair), NC35
€308.36
These real carbon air ducts are a direct replacement for the cheap and nasty plastic ones the bike is supplied with. Fits in a few minutes and makes a dramatic improvement to the overall appearance of the bike.
TYGA no: BPCX-0018satin
SKU: hon-11444 Categories: ALL products, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopHandlebar set 50 mm, silver
€230.31
Designed and machined in house from aircraft grade aluminium, suitable for most sports bikes with 50mm. inverted front suspension. See application chart below.
7 degree angle for a comfortable, yet sporty feel.
Ducati 750/900SS
Ducati Monster, Pre 2010
Honda CBR1000RR 2004
Honda CBR929/954
Honda RC45
Honda RC51 2000-05
Honda RS250 NF5/NX5 USD
Honda RVF400 NC35
Kawasaki ZX10R 2004
Kawasaki ZX14R All
Kawasaki ZX6/RR/636 2003
Suzuki GSXR1000 2001
Suzuki GSXR1100 95-98
Suzuki GSXR1300 All
Suzuki GSXR600 2004
Suzuki GSXR600 92-93
Suzuki GSXR600 94-96
Suzuki GSXR750 1993
Suzuki RGV250 VJ22/23
Suzuki TL1000R
Suzuki TL1000S
Yamaha R1 1998
Yamaha R6 2005
Yamaha YZF750 94-97
Please note that these bars may have clearance issues with components when used on street bike and are primarily sold for race use.
TYGA no: TYLY-0078
SKU: alg-10090 Categories: ALL products, Aprilia, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR600RR 2007- 16, CBR900RR 1992- 95, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, Kawasaki, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, RSV125, RVF400RR NC35, Shop, Suzuki, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, ZX10R 2011 -15Top Triple Clamp, CNC Black, CBR600RR forks / NC30 Shaft
€196.92
Top Triple Clamp, CNC Black, CBR600RR forks / NC30 Shaft
CNC designed and manufactured in house. Facilitates mounting holes for securing the ignition switch holder assy TYLY-1144
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.