Carbon Lower cowling, stock shape, NXA RS250R (2001- ’08)
€524.11
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
CDI Zeeltronic Mito MK3 SP525
€265.00
Complete fairing set T9, Honda CBR400RR
€775.32
This set of bodywork comprises of the parts shown below which are also available separately
This kit is supplied with all additional fasteners required to mount it to a stock NC23. It fits to the original meter and supplied with a mirror stay. It uses the Honda mounting points and fasteners for mirrors. Where it mounts to the lower cowling and frame, it uses the original Honda bolts and clips (not supplied)
Oil pump +40% Kitaco, Honda MSX Grom
€64.13
Oil pump 40% Kitaco, Honda MSX Grom
High performance with high quality and durability.
Specially designed for the tuned MSX125 Grom. It’s a must for every Honda MSX.
TYGA no: 331-1432000
SKU: MSX-10377 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020Top triple clamp CNC black RACE, KTM RC390, 2014- 21
€442.15
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1931
SKU: ktm-10219 Categories: ALL products, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, Stock list, all modelsClutch lifter plate, Honda Monkey 125 2022
€26.82
Rear Fender, Carbon, stock shape, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
IMPORTANT, Rear fender BPCH-7042 is not compatible with the Honda number
plate holder (part number 80100-KOF-T00 ) due to the weight of the Honda
part. We recommend when installing BPCH-7042 that TYGA registration holder
BPCK-7142 is installed instead
TYGA no: TYLY-0167
SKU: msx-10514 Categories: ALL products, High performance, Honda, Shop, Various partsFuel Tank, GRP, NSR250, MC28, Painted Rothmans
€1,304.96
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFG-9001Painted
SKU: hon-10971 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersFront fork adjuster 22mm
€32.91
ront fork Pre-load adjuster. suitable for adjuster with 22 mm oval type fitment, for example:
Aprilia RS-250 1998 2003
Aprilia RSV1000 ( with Showa forks) 2000 2006
Ducati 1098 (with Ohlins forks) 2008 2009
Ducati 916/996/998/999 1994 2007
Ducati 900SS/SP 1990 1998
Honda RVF400 1994 2000
Honda CBR 600 RR 2005 2006
Honda CBR 900 RR Fireblade 2000 2003
Honda CBR 1000 RR 2004 2007
Honda VTR 1000 SP1/2 2000 2007
Kawasaki ZXR-400 1990 2002
Kawasaki ZX 6R/RR 2005 2006
Kawasaki Z1000 2003 2006
Suzuki GSX-R 750
1992 2003
Suzuki RGV250 VJ22/VJ23
1990 1997
Suzuki GSX-R 750 2004 2005
Triumph Speed Triple 1050 2005 2010
TYGA no: TYLY-111 - TYLY-4111
SKU: alg-10152 - alg-10154 Categories: 848 / 1098 / 1198, ALL products, Aprilia, CBR1000 2004-7, CBR600RR 2005- 6, CBR600RR 2007- 16, CNC parts, Ducati, Honda, Kawasaki, RGV250 VJ22, RS250, RVF400RR NC35, Suzuki, Various parts, Various parts, Various parts, VTR1000Sp1SP2, ZXR250C