Top Triple clamp CNC black , Suzuki RGV 250
€218.46
CNC machined TYGA top triple clamp ( without detachable key holder for race use) for your RGV250 VJ22.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch holder can be ordered separately or together with this product as set TYLY-1046.
TYGA no: TYLY-1046(p)
SKU: suz-10056 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiFuel Tank, carbon, HONDA VFR750R RC30
€1,362.72
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Seat set with carbon race, Honda NSR250 MC21
€606.64
This set of bodywork is designed to replace the stock seat cowling with the race version of our GP Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21 but also an MC28 fitted with an MC21 fuel tank. The kit comprises of the parts below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0004
SKU: hon-10224 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, ShopSet, Exhaust Chamber, NSR500V Style, Stainless Steel, NSR250 MC28
€795.00
Set, Exhaust Chamber, NSR500V Style, Stainless Steel, NSR250 MC28
Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
For more information on how to get the best power out of this system, combine it with other parts of our MC28 Power Up Kit (see under ‘technical help’ on left hand menu) to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock foot peg hangers as well as work with our Tyga Performance step kit STAA-0002. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)
The NSR250V design, is provided with silencers clamping hardware which mounts directly to the NSR250V seat cowling BPFS-9043 or BPFT-9143 via exhaust stays TYLY-0243 for a more secure and firm installation.
By selecting stainless steel for longevity and beauty, TYGA systems offer unbeatable value.
Please note this product fits MC28 only although it can be installed with the MC21 if the MC21 has an MC28 swing arm installed. For the MC21 with a stock MC21 swing arm, please select EXCS-0005A
This product, EXCS-0047, has one chamber exiting left and one chamber exiting on the right in a high position similar to the NSR500V race bike. As a consequence, this system is only suitable for motorcycles without passenger foot pegs. For motorcycles with passenger foot pegs, please select EXCS-0006 and EXCS-0005B
Parts included with this product:
1 x left side chamber, side by side (left exiting) stainless steel
1 x right side chamber, side by side (right exiting) stainless steel
2 x silencer single clamps and mounting bolts, washers and nuts. Be sure to select the correct type. 70mm for silencers EXSL-0083 and EXSL-0084 and 60-61mm for silencers EXSL-9005, EXSL-0003, EXSL-0004, EXSL-0065 , EXSL-0066 and EXSL-0067
2 x manifolds
2 x mounting flanges
4 x mounting springs
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set. Note, we recommend that if you are installing this exhaust with seat set NSR250V BPFT-9043 or BPFT-9143 then order exhaust stay set TYLY-0234
TYGA no: EXCS-0047
SKU: hon-11045 Categories: ALL products, Exhausts, High performance, Honda, NSR250, NSR250 MC28Top triple clamp CNC silver , Honda RVF400 -> CBR600 fork
€263.52
Top Triple Clamp, CNC silver, CBR600RR forks NC35/MC21/MC28 Conversion
CNC designed and manufactured in house as a direct replacement for the standard top triple clamp. Facilitates mounting holes for securing the ignition switch holder assy TYLY-0041 for use on NSR conversion or TYLY-0042 for NC35 conversion.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
TYGA no: TYLY-0059
SKU: hon-10552 Categories: ALL products, CNC parts, Honda, Shop, Stock list, all modelsCarbon generator/sprocket cover, Honda NSR250 MC18/MC21/MC28
€220.36
Generator/Front Sprocket Cover NSR250
This lightweight carbon component will make your engine look like it belongs in the GP paddock!Complete with all mounting holes to install speedometer drive and cable guide for side stand switch.
Important, this products re-uses the stock engine case guard from the plastic cover.
TYGA no: BPCC-9106
SKU: hon-10471 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopUpper/meter stay aluminium, Suzuki RGV250 VJ21
€269.17
Upper/Meter Stay, Aluminium, RGV250 VJ21
This lightweight aluminium meter stay is designed to replace the stock heavy steel one and retains all the functions of the stock one (except the loop for the speedo cable). It is a simple case of removal of the Suzuki stock one and installation of the TYGA replacement to improve power to weight and handling as well as enhance your VJ21’s appearance. The difference in weight is:
Standard Upper/Meter stay with no fittings: 1.5kg
TYGA Upper/Meter stay with no fittings: 0.8kg
Finished in high quality satin black powercoating.
TYGA no: TYLY-0249
SKU: suz-10147 Categories: ALL products, Bodywork and carbon, RGV250 VJ21, Shop, Suzuki, Various partsClamp, Manifold, NC30/35
€18.96
Manifold Clamp. Fitted to rear cylinder port. For use with:
EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)
EXPS-0011 Set, Pipe, Full Race System NC30-35 Maggot Silencer
EXPS-0028 Set, Pipe, Full Race System NC30-35, Oval Carbon/Carbon End Cap Silencer
EXPS-0012 Set, Pipe, Full Race System NC30-35, Oval Stainless Silencer
EXPS-0053 Set, Pipe, Full Race System NC30-35, Round Aluminium Silencer
EXPS-0010 Set, Pipe, Full Race System NC30-35, Round Carbon Silencer
EXPS-0026 Set, Pipe, Full Race System NC30-35. Round Carbon/Carbon End Cap Silencer
EXPS-0003 Set, Pipe, Twin Stack System, Carbon Silencers
EXPS-0005 Set, Pipe, Twin Stack System, Stainless Silencers
TYGA no: EXMC-0008a
SKU: hon-10854 Categories: ALL products, Exhausts, Exhausts, Exhausts, Stock list, all models