TYGA flywheel/RC valve remover, Honda NSR125/150/250/300
€135.99
This new, TYGA designed 2 in 1 combination tool is a flywheel puller and RC valve removing tool all in one handy package.
Saves space in your toolbox, and less clutter on the work bench.
How to use:
Familiarise yourself with the parts (see picture).
The tool is delivered ready for use as a flywheel puller. Just screw part D into the crank, then wind the (left hand) threaded main body (part A ) into the flywheel centre and pop the flywheel off by rotating part B clockwise. Part C is not used.
For removing the RC valve shaft remove part B completely and refit from the opposite end, screwing all the way home. Then slide in the part C . Position the tool over the valve shaft and wind part C onto the RC valve shaft (left hand thread). When fully home just rotate part B anti-clockwise to pull out the shaft. The RC valve shaft seal and E-clip will probably be damaged in the process, and should be replaced. Part D is not used.
22mm and 19mm spanners (not supplied) are required for correct operation.
*Note* This tool can be used on the NSR150 to remove the RC valve shaft, but will not fit the flywheel. Please use TYTO-0007 for this job.
TYGA no: TYTO-0014
SKU: hon-10329 Categories: ALL products, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Tools, Various parts, Various parts, Various parts, Various partsSection, Header, Rear Left, Stainless, VFR750F, 3rd Gen, 90-93
€122.86
TYGA no: EXPT-3151
SKU: hon-11345 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Front fork adjuster 14mm
€32.91
Front fork Pre-load adjuster. suitable for adjuster with 14 mm oval type fitment, for example:
Make Model from year to year
Honda NSR250 1988 1997
Honda VFR400R 1989 1993
Honda CB 1300 2003 2009
Honda CB 1300 S 2005 2013
Honda CBR 600 F 2001 2007
Honda CBR 600 F Sport 2001 2002
Honda CBR 600 RR 2003 2004
Honda CBR 900 RR Fireblade 1992 1999
Honda Hornet 900 2002 2005
Honda VTR 1000 F Firestorm 1997 2006
Suzuki GSX-R 600 1997 2003
Triumph Daytona 1200 1993 1997
Triumph Daytona 900 1993 1996
Triumph Daytona 955i 1999 2006
Triumph Daytona T595 (955i) 1997 1998
Triumph Speed Triple 2003 2004
Triumph TT 600 2000 2003
TYGA no: TYLY-1110 - TYLY-4110
SKU: alg-10149 - alg-10151 Categories: ALL products, CBR600RR 2003- 4, CBR900RR 1992- 95, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Sidehanger right TYGA, Honda RS250 NF5
€47.25
Tyga Step Kit Replacement Right Side Hanger, NF5 RS250R
Exact replica of the HRC part 50630-NF5-000, Holder, R. Step.
TYGA no: STAH-0052
SKU: hon-10548 Categories: ALL products, By model, By product, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon fuel tank, Suzuki VJ22 RGV250
€1,225.57
One of our most popular bodykits from last years.
This kit comprises of the parts shown in the picture which are also available separately.
Light and strong, update your RGV250 with these great parts.
* A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock VJ22
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: 1900KT/P
SKU: suz-10233 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiCarbon cover, Speedo 92mm
€32.14
Carbon cover, Speedo 92mm
This cover fits snuggly over the original plastic Honda gauge cover and adds a sporty appearance. It is also ideal for hiding any ugly scratches or dents that may have occurred over the years. Fits in second and can be held in place with a dab of glue or silicone adhesive.
This product is suitable for the following models:
MC18 NSR250
MC21 NSR250
MC22 CBR250RR
NC29 CBR400RR
NC30 VFR400R
NC35 RVF400
RC30 VFR750R
SC28 CBR900RR
Also available as a complete set with speedo,temp gauge and rev counter, see BPCC-0027
This product might also fit other models.
TYGA no: BPCC-0022
SKU: hon-10613 Categories: ALL products, Carbon, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR250 MC18, NSR250 MC21, RVF400RR NC35, Shop, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Fairing stay side pair , Honda VFR400 NC30
€33.29
Fairing Stay, Side, Pair, VFR400R NC30, GP-T, Assy.
Made in stainless steel and designed specifically for the VFR400R NC30 GP-T fairing, these side stays fit to the frame in the same position as the stock Honda stays and allow for a little more adjustment. They are supplied with bushes so when the stays and bushes are used together, they provide the correct position for perfect fitment of the GP-T fairing. This product can also be used with any other race fairings or stock application.
TYGA no: BPSY-0189
SKU: hon-10586 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, VFR400RR NC30Carbon Rear hugger with chainguard, Suzuki RGV 250 VJ23
€216.82
Rear Hugger/Chain Guard (Carbon), VJ23 RGV250
The VJ23 RGV250 is the only RGV250 model which does not have a rear hugger as standard and as a result, all the road filth and rain tends to collect around the rear shock and under side of the seat cowling. TYGA Performance have developed this carbon hugger as a solution to the dirt issue while making the swing arm/rear wheel part of the bike more attractive. Designed to fit onto the contour of the VJ23 swing arm’s fabrication and lock into position by a rub underneath, the TYGA hugger incorporates the rear chain guard too, using the chain guard’s mounting holes on the left to hold it securely in place. On the right side, it is held on by a cable tie through the rear brake line guide and at the front by an M4 bolt which is requires drilling and tapping of the swing arm by the customer to install this product.
IMPORTANT, note that due to the VJ23 never having the option for a rear hugger, there is no position provided on the swing arm to mount the hugger at the front and it is necessary to drill and tap an M4 hole in the swing arm and use a cable tie to provide a good level of support for the hugger. See photos 7 and 8 for details on what is required to install this product.
Complete with all fitting hardware.