Section, Final, Stainless, Yamaha R25/R3
€147.90
Section, Final, Stainless, Yamaha YZF-R25 and YZF-R3
Used with EXPS-0072, EXPS-0073, EXPS-0074 and EXPS-0075.
Screen MiniRacerXtreme, Honda MSX125 GROM
€52.00
Screen MiniRacerXtreme, Honda MSX125 GROM
This screen fits the TYGA bodywork
TYGA no: SCRE-0163- SCRE-0164
SKU: msx-10260 - msx-10261 Categories: ALL products, Aprilia, Bodywork, Honda, MRX, MSX125 2013 - 2015Fairing set race GP-T, Honda VFR400 NC30
€722.77
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC30. As well as bringing the NC30 up to date, it also offers a useful weight saving and easy fitment and removal. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0163
SKU: hon-10630 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30Kit, Fairing Set (GRP), Honda NX5 1993 RS250R (early model style)
€870.62
Kit, Fairing Set (GRP), Honda NX5 RS250R (1993 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Lower Cowling, (GRP) NX5 RS250R (1993 Style) (BPFL-9136)
The lower fairing is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9236
Seat Cowling Race (GRP) NX5 RS250R (1993 Style) (BPFT-9236)
The seat cowling is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock subframe as far as we can tell. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
TYGA no: BPFS-0180
SKU: hon-10940 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon fuel tank (early type), Honda RS250R NX5
€1,444.49
Fuel Tank, Carbon, RS250R NX5 (Early Type)
Top quality reproduction of the early non ram air version NX5 fuel tank in carbon fiber.
Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel, Avgas 100LL to E85 (85% ethanol). Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light ( 2.25 kg) Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts and following the stock shape, the following stock parts can be used (not included):
Fuel Cock
Breather
Front strap
Stock mounting rubbers
Filler cap and seal
IMPORTANT: Please note that this fuel tank, for ease of manufacture, uses the later flush fitting NX5 type filler cap. This can be purchased from HRC (part numbers 17521-NX4-680 for filler cap and 17515-NX5-770 for seal) or we can supply our own TYGA version (Cap: TYLY-0178A, Seal: BPSY-0238) Note the filler cap and the above list of parts are not included with the fuel tank and needs to be purchased separately.
TYGA no: BPCG-0003
SKU: hon-10946 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopThrottle Cable, Open, Ninja 250R 2008 -12
€15.30
Throttle Cable, Open, Ninja 250R 2008 -12
TYGA no: 54012-0293
SKU: kaw-10209 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopCarbon tail light cover TYGA, Aprilia RS250
€45.19
Cover, Carbon,Tail Light TYGA Aprilia RS250
This cover is made specifically for the TYGA Carbon , Race bodywork kit (BPFS-0167) Fills in the light holes to make a smooth seat cowling for race use.
Not suitable for the stock bodywork
TYGA no: BPCX-9530
SKU: apr-10088 Categories: ALL products, Aprilia, Bodywork, Bodywork and carbon, RS250Ignition rotor (track only), Honda NSR250 MC21/MC28
€203.15
HRC style total loss ignition rotor for the NSR250 MC28.
Simply remove the standard rotor and generator system and fit this super light weight rotor.
Timing position is the same as standard MC28 rotor, but this can of course be adjusted by offset woodruff keys.
For use on NSR250 MC21 an offset woodruff key (2 degree advanced) must be used.
Please note that this rotor is for racing only and cannot be used on the street. It’s use requires that the battery be fully charged and in tip top condition as the charging system is removed and performance relies solely on the battery condition.
TYGA no: TPER-0040
SKU: hon-10382 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, Shop