Lower cowling, Aprilia RS250 Tyga, assy
€234.42
This lower cowling is suitable for our Aprilia RS-250 kits, BPFS-0100 and BPFS-0101.
This product is compatible with upper cowling BPFU-9030 and BPFU-9130. Will not fit stock Aprilia upper cowling
TYGA no: BPFL-9030Â
SKU: apr-10044 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, ShopCarb Service Kit B, 23 pieces, Honda CBR250R MC14, MC17 & MC19
€43.36
Carb Service Kit B, 23 pieces, Honda CBR250R MC14, MC17 & MC19
LiteTek Carburettor Seal Kit to suit
Honda CBR250R MC14, MC17 & MC19
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x OR-011 Float Breather O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-KT7-003)
6x OR-016 Fuel T-Pipe O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-KT7-003)
6x WS-018 Vacuum Breather O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-KT7-003)
4x CS-004 Choke Plunger Cap, Material: HNBR, (Part of Honda Assembly Part No. 16046-KT7-003 or 16046-KT8-003)
3x SC-008 Throttle Synch Screws, Material: Stainless Steel
TYGA no: CKB-Honda-MC19
SKU: alg-10362 Categories: ALL products, Carburettor Service Kits,, CBR250R MC19, HondaSet pipe slip on carbon oval with cap, CBR500
€504.96
.Set, Pipe, Slip On, CBR500, Carbon Oval/Carbon End CapMade in stainless steel with spring mounted carbon silencer, and precision made CNC machined end cap. (May not comply with noise regulations for some states and territories)This system is supplied with a carbon silencer EXSL-0043<iframe width= 560 height= 315 src= https://www.youtube.com/embed/CTgM0wCAvfg frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0045Â
SKU: hon-10327 Categories: 4 stroke exhaust sets, ALL products, CBR500R, Exhausts, Honda, ShopCarbon exhaust stay, Kawasaki ZXR400L
€95.39
Set, Pipe, Stainless, Full Race System, Stainless Maggot Silencer, ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs.
As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
It uses the TYGA Moto Maggot silencer, this system may not comply to specific country noise emission regulations and is not homologated for street use. Actually it is extremely loud so be warned!.
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
Please also see EXPS-0137, EXPS-0138 and EXPS-0139 for similar system
Set exhaust Gp style stainless steel, Honda NSR250 MC28
€769.95
Set exhausts side by side stainless steel, Honda NSR250 MC28
The ultimate exhaust set for your NSR250, beauty and performance!
Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
For more information on how to get the best power out of this system, combine it with other parts of our MC28 Power Up Kit (see under ‘technicical help’) to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock footpeg hangers as well as work with our Tyga Performance step kit STAA-0002. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)
NEW! Our latest design, is provided with silencer clamping hardware which mounts directly to the stock right side MC28 silencer stay for a more secure and firm installation.
By selecting stainless steel for longevity and beauty, TYGA systems offer ubeatable value.
Please note this product fits MC28 only. For MC21, please select EXCS-0006A
This product, EXCS-0006B, has both chambers exiting on the right.
Parts included with this product:
1 x left side chamber, GP (right exiting) stainless steel
1 x right side chamber, (right exiting) stainless steel
1 x silencer double clamp and mounting bolt, washers and nut
2 x manifolds
2 x mounting flanges
4 x mounting springs
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set
TYGA no: EXCS-0006b
SKU: hon-10605 Categories: 2 stroke exhaust sets, ALL products, By model, Exhausts, Exhausts, Honda, NSR250 MC28, ShopSilencer stainless round, 2" x 380mm
€230.91
Silencer, Stainless, Round, 2" x 380 mm., Assy
This silencer has polished stainless steel endcaps and a hairline finish stainless tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2" external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2" external diameter tail pipe, this silencer uses a 4" x 380 mm. outside Stainless tube.
* Please note that decibel killer model EXDK-0003 is compatible but not included with this exhaust system. Please add EXDK-0003 to your cart if you wish it to be included in your order.
TYGA no: EXSL-0079
SKU: hon-11010 Categories: ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Handle bar bung (pair), Honda RVF400 NC35
€12.47
Seat Cowling, (GRP), NC30/NC35 GP-T
This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0148 (GRP, NC30)
BPFS-0149 (GRP, NC35)
BPFS-0150 (Carbon, NC30)
BPFS-0151 (Carbon, NC35)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T
TYLY-0133 Subframe, NC30/NC35 GP-T
TYLY-0130 Batterybox NC30/35 GP-T
BPFX-9234 Seat Support, NC30/NC35 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
Cover, Lower Left, Carbon, Assy, VFR750 3rd Gen, 90-93
€153.21
Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: BPCX-7049
SKU: hon-11339 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93