Brake lever titanium, NC30 NC35
€39.67
CNC machined from solid billet, this lever replaces the main section of the lever assembly and attaches to to the stock Honda adjuster and plunger to maintain that OEM feel. Easy to install.
These levers are designed to fit most of the Honda sports bikes of the 1990s:
MC19, MC22, MC18, MC21, MC28, NC23, NC29, NC30, NC35, RC30, RC40, RC45 etc.
TYGA no: LEVB-6011
SKU: alg-10053 Categories: ALL products, CBR400RR NC23, CBR400RR NC29, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, VFR400RR NC30Shroud left Red, Honda MSX125 GROM
€32.45
Shroud left Valentine Red, OEM Honda part
TYGA no: 83490-K26-900ZB
SKU: MSX-10121 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopAirbox carbon/kevlar, A kit, Honda RS250 NXA
€908.18
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
PC programming cable
€49.00
Reed valve Gasket silicone (set), Aprilia RS250/Suzuki RGV250
The OEM reed blocks and manifolds have a build in rubber ring, what after 20 years isn’t perfect anymore.
We offer a simple but effective solution, no risk on damaging the engine.
And can be used multiple times.
1 engine = 1 set
Set pipe Stainless full race system “round aluminium silencer”, Kawasaki ZXR400L
€827.77
Set, Pipe, Stainless, Full Race System, Round Aluminium Silencer, ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs. It uses a 450 mm long aluminium round silencer to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
Please also see EXPS-0137, EXPS-0139 and EXPS-0140 for similar system.
Carbon bikini fairing, Honda MSX125 GROM
€141.41
Bikini Fairing (Carbon), MSX125 Grom
This bikini fairing is uniquely designed to blend with the stock bike’s styling and neatly integrate the headlight unit with the instrument cluster. Available in carbon shown here and also in GRP (see BPFU-7128). This unit can be installed on completely stock bike or with other TYGA products as shown in the photo.
TYGA no: BPCU-7128
SKU: MSX-10185 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopStay maggot silencer, Honda MSX125SF GROM
€21.25
Stay, Maggot Silencer, MSX125SF, High Level Exhaust
This product allows for the use of a TYGA Performance high level full race system with the 2016 second generation MSX125SF Grom. Some small modification to the rear fender is required to allow for installation, but once installed, the stay is neat and tidy and unobtrusive. This product is suitable for, and included with, the following model exhaust:
EXPS-0065 Set, Pipe, Full Race system, MSX125SF Grom, Moto Maggot
Note: This product can be ordered individually and used for customizing your bike with any high level exhaust. See also similar product BPSY-0177 which has the mounting holes further toward the rear and is used with our oval silencer full race system EXPS-0066 and EXPS-0067.
TYGA no: BPSY-0175
SKU: MSX-10342 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, ShopSilencer, Carbon, Two Stroke, 70mm, Assy
€151.18
Silencer, Carbon/Kevlar, Two Stroke, 70mm, Assy
This high quality lightweight silencer is made from CNC machine entry and pressed stainless steel exit cap joined by a carbon/Kevlar fiber tube. It is designed very similar to the ones we make for the NSR500V but is a direct fitment for our 250V style chambers and provides the same power characteristics as our other two stroke silencers. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
Note this product is intended to be used with our exhaust chambers (EXCS-0047) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.
Compatible Products:
Tyga Performance Two Stroke chambers sets EXCS-0047. (We will be adding more to this list as we get the chance to install with other previous TYGA exhaust systems, Feel free to request advice by email about suitable applications) Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0083 carbon
TYGA no: EXSL-0083
SKU: hon-11048 Categories: ALL products, Exhausts, High performance, Honda, NSR250, NSR250 MC28