Section header stainless WSS300 race system, KTM RC390
€226.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0077
SKU: ktm-10135 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsPower Up Kit, RGV250 VJ23
€2,635.46
VHM cylinder head (2 pieces), RGV250 / RS250 (alg-10092)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website, for use on the Suzuki RGV250, and also Aprilia RS250.
VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.
During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design. Combustion chambers are available in different volumes.
This head set comes with following parts:
2x cylinder head
2x standard insert (12.0cc)
Other options:
11.80
12.00 (standard)
12.20
12.40
12.60
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Set full race system with stainless silencers with carbon cap, Kawazaki Z125 2016-
€536.29
Set, Pipe, Full Race System, Kawa Z125, Stainless Oval/Carbon End Cap
This full race system has been specifically designed for the Z125 to maximise performance and looks. The header section has a special bulge to reduce the sound level, without sacrificing power. Complete with Lambda boss for 100% compatability with the stock electronics.
The final silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with a decbel killer for noise reduction.
Performance and Dynograph
The green trace shows the 100% standard Kawasaki Z125, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0063)
A useful gain all through the range, with potential for other engine mods.
Kawasaki Z125 Sound Level Test
Test Method: SAE J2825 Static sound level test for motorcycles
Equipment: DIGICON IEC-651 TYPE II sound meter
RPM TYGA System – No DBK TYGA System – DBK Installed OEM System
Idle 82 73 69
4000 92 84 81
5000 93 85 86
6000 95 87 91
TYGA no: EXPS-0063
SKU: kaw-10055 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Shop, Z125 2016-Collar manifold, Aprilia RS125
€27.03
This is a replacement part. When ordering chambers, this item is included in the price and you do not need to order this parts separately.
Compatible with the following TYGA system:
EXCS-0019
TYGA no: EXMN-0004Â
SKU: apr-10003 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, RS125, ShopCarbon holder brake hose "NSR500V style), NSR250 MC28 – NC30 – NC35
€45.78
Holder, Carbon, Brake Hose, NSR500V Style
This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.
It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.
Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.
TYGA no: BPCC-0051
SKU: hon-11203 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC28, NSR500V NX6, RS250R NF5 / NX5, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Carbon air duct NX6 NSR500V
€139.58
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Carbon meter cover silver, NSR250 MC28
€36.50
Attractive carbon cover for MC28 meter assembly.
For fitment, simply remove the three retaining bolts, stick on the cover and replace the bolts
TYGA no: BPCC-0003
SKU: hon-10246 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, By model, Carbon, Honda, NSR250 MC28, ShopBracket front brake CNC black 84mm Brembo, Honda MSX125 GROM
€33.06
Bracket, Front Brake, 84mm Brembo Conversion, Black, MSX125 Grom
This is to fit the 84mm pitch rear caliper.
Also available in silver (TYLY-0098)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
Only suitable for the non ABS models
TYGA no: TYLY-1098
SKU: MSX-10126 Categories: ALL products, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop