Airbox Carbon/kevlar, Honda NSR250 MC21/MC28
€635.04
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPCX-0007
SKU: hon-11071 Categories: ALL products, Bodywork and carbon, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Bracket front brake CNC silver 40mm Brembo, Yamaha R25/ R3
€51.61
Bracket, Front Brake, 40 mm Brembo Conversion, Silver, Yamaha R25/R3
CNC machined brake caliper support for your Yamaha R25/R3.
Designed and machined in house. Crafted from 6061 T6 aluminium, this caliper support allows you to fit a Brembo Goldline P4 30/34 caliper (40mm mounting pitch) to your R25/R3.
Tried and tested with the standard master cylinder and standard brake lines with great performance.
For race or track day use we recommend upgrading your master cylinder for ultimate stopping power.
Bum stop, RC30 style replacement
€74.00
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPSP-0012
SKU: hon-11470 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsAirbox side cover, Honda RS250 NX5
€278.67
Carbon airbox side cover.
Fits the TYGA air box, it’s not known if it will fit the HRC one.
TYGA no: sspecial010
SKU: special010 Categories: ALL products, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various partsCollar/manifold Special , NSR250
€62.38
This is a special replacement part for the NSR250. The manifold has a CNC machined profile, matching the exhaust port exit to allow smooth exhaust gas transition from the cylinder into the expansion chamber. This helps to increase performance from as little as 7,000rpm all the way up to and beyond peak power.
Stephen A’lee of George White Superbikes in the UK independently dyno tested the manifolds on a stock engine MC21, with Stock airbox. The only mods were TYGA pipes.
The red trace shows the above bike using the supplied EXMN-0003 manifold with a peak of 57.2hp.
The blue trace shows the same bike with EXMN-9003 special manifolds fitted. A gain of 1.4hp with no jetting changes.
Compatible with the following TYGA system:
EXCS-0003
EXCS-0005
EXCS-0006
TYGA no: EXMN-9003Â
SKU: hon-10381 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Exhausts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopRC Valve Cable B, NSR150SP
€11.81
RC Valve Cable B, NSR150SP
TYGA no: 14340-KW6-840
SKU: hon-11171 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR150SPSeat set street T13, Honda RVF400 NC35
€919.75
This set of bodywork is designed to replace the NC35 stock seat cowling with GRP version of our T13 seat cowling and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.
This product is suitable for the NC35 and is the base version without carbon fiber front section to keep the cost to a minimum. We also offer a deluxe version of the same product with carbon front section for enhanced looks and strength, see also BPFS-0118.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0117
SKU: hon-10313 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopCarbon silencer guard WSS300 race system, KTM RC390
€127.88
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCC-0076
SKU: ktm-10201 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all models