Carbon fuel tank (early type), Honda RS250R NX5
€1,444.49
Fuel Tank, Carbon, RS250R NX5 (Early Type)
Top quality reproduction of the early non ram air version NX5 fuel tank in carbon fiber.
Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel, Avgas 100LL to E85 (85% ethanol). Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light ( 2.25 kg) Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts and following the stock shape, the following stock parts can be used (not included):
Fuel Cock
Breather
Front strap
Stock mounting rubbers
Filler cap and seal
IMPORTANT: Please note that this fuel tank, for ease of manufacture, uses the later flush fitting NX5 type filler cap. This can be purchased from HRC (part numbers 17521-NX4-680 for filler cap and 17515-NX5-770 for seal) or we can supply our own TYGA version (Cap: TYLY-0178A, Seal: BPSY-0238) Note the filler cap and the above list of parts are not included with the fuel tank and needs to be purchased separately.
TYGA no: BPCG-0003
SKU: hon-10946 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopSet pipe, Full race without silencer NEW, Kawasaki ZXR250 2013 –
€345.33
2013-2017, Set, Pipe, Full Race System, Ninja 250R, No Silencer
We now have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 250 when used with the TYGA system*. Made in stainless steel this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with no silencer
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0050.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 250 Exhaust pipe sections and silencers.
TYGA no: EXPS-0077
SKU: kaw-10065 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Choke Cable, RC36-2, RC30 Style
€11.29
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYTO-0033
SKU: hon-11521 Categories: ALL products, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsCarbon Rear hugger, Aprilia RS125 (1996-2008)
€156.69
Fits all model Aprilia RS125. Weight approx. 0.125 kg.
Update your bike with this great carbon product, direct replacement of the original part
TYGA no: BPCH-7007
SKU: apr-10012 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS125, ShopSet pipe Stainless full race system “no silencer”, Kawasaki ZXR400L
€644.67
Set, Pipe, Stainless, Full Race System (No Silencer), ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
In this set NO silencer is included please see EXPS-0138, EXPS-0139 and EXPS-0140 for systems with silencer
Carbon rear hugger “no taillight surround” stock shape, Honda Monkey 125 2018-
€162.86
Rear Fender, Carbon, stock shape, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
IMPORTANT, Rear fender BPCH-7042 is not compatible with the Honda number
plate holder (part number 80100-KOF-T00 ) due to the weight of the Honda
part. We recommend when installing BPCH-7042 that TYGA registration holder
BPCK-7142 is installed instead
TYGA no: BPCH-7142
SKU: msx-10512 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopCarbon Seat set RVF, NC35
€912.34
Stock shape seat cowling with or without taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad. Please specify if you would like taillight holes and taillight mount made for no extra charge.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
This panel can also be ordered in kit BPFS-0066 complete carbon set NC35, street, and BPFS-0068 complete carbon set NC35, race.
TYGA no: BPCT-9004
SKU: hon-10139 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopSet, pipe full race system round carbon silencer RH exit, VFR750F gen 4, 94-97
€1,373.19
Set, pipe full race system round carbon silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: EXPS-0135
SKU: hon-11043 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97 Tag: Exhaust systems