Silencer, Stainless Moto Maggot, 43 mm., Ninja 250R, Assy.
€208.49
Same as EXSL-4013(p) but with mounting springs and spring hooks to weld on an existing system. designed to be used with Tyga Performance exhaust systems and other custom exhausts. Not suitable for stock Ninja system.
TYGA no: EXSL-4013
SKU: kaw-10084 Categories: 4 stroke exhaust sets, ALL products, Exhausts, SilencersSpeedometer pick up layshaft , NC23, NC29, NC30, NC35
€17.20
Speedometer Pick Up, Layshaft
TYGA no: 44808-MR7-013
SKU: hon-10507 Categories: ALL products, CBR400RR NC23, CBR400RR NC29, Honda, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, VFR400RR NC30Set, Pipe, Full Race System, Ninja 300R, Round Aluminium Silencer
€557.94
2013-2017, Set, Pipe, Full Race System, Ninja 300R, Round Aluminium Silencer
We now have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 300 when used with the TYGA system*. Made in stainless steel with spring mounted round Aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an Round Aluminium silencer EXSL-0040
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0018.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 300 Exhaust pipe sections and silencers.
TYGA no: EXPS-0097
SKU: kaw-10069 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Athena gasket kit complete set, Honda NSR250 1990 – 96
€65.29
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: P400210850268
SKU: alg-10417 Categories: ALL products, High performance, High performance, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsFront Fork Preload Adjusters black/gold (Pair), Honda MSX125 GROM
€172.49
Front Fork Preload Adjusters, Pair, MSX125 Grom, Black/Red
These fully functional preload adjusters replace the blank end caps on the stock MSX125 Grom front suspension. It is generally acknowledged that the MSX125 is a bit soft on the front and these caps allow the rider to increase (or reduce) the amount of preload on the internal springs, which in turn, effectively increases or reduces the stiffness of the front forks allowing for a better set up for your riding style or conditions.
These adjusters allow you and extra 6mm of preload from standard.
Supplied in black and gold anodised finish, (see TYLY-0097 and TYLY-1097 for other colour versions too) these adjusters are as beautiful as they are functional.
Carbon engine cover (right),(5 speed engine) Monkey 2022-
€93.94
TYGA no: BPCC-7542
SKU: msx-10516 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, Monkey 125 2018-, MSX125 2021-, ShopSilencer carbon oval, m carbon cap (4 stroke) 2
€394.60
This silencer has a carbon endcap and a carbon tube to produce a modern, attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is 2 internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
For use with pipe set EXPS-0012 or any system using a spring mounted 2 inlet.
Please also look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: EXSL-0035
SKU: alg-10070 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30Upper stay, Tyga Gp MC18/MC21/MC28
€70.24
Lightweight GP style upper stay to use on the GP style fairing
Compatible Parts
Upper cowlings, BPFU-0004, BPFU-0005, BPFU-0015 and BPFU-9012. For use with MC18, MC21 and MC28 models only
TYGA no: TYLY-0001
SKU: hon-10253 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, By model, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop