Dash Indicator Bulb Harness, NC30/35
€17.20
This product plugs in line with the wiring connector that connects to the main harness from the left hand handlebar switch and allows the turn signal instrument warning light to function properly when LED turn signals and turn signal relay TELC-0002 are installed. Without this harness, the LED turn signals and turn signal instrument warning light will not flash properly. To install simply unplug the connector at the front of the bike near the master stay and install the TYGA mini harness in line.
TYGA no: TYWH-0002
SKU: hon-10756 Categories: ALL products, Honda, RVF400RR NC35, Various parts, Various parts, VFR400RR NC30Aluminium wheel spacer kit “orange” , KTM Duke – RC125/RC200/RC390
€59.36
Wheel, Aluminium Spacer Kit, KTM Duke – RC Series
Update your bike with this great TYGA performance, KTM power part!!
This comprehensive kit is specifically designed for the KTM racer in mind. The wheel spacers have been cleverly designed to be captured in the seals (instead of being loose as they are with stock set up), enabling quick and easy wheel removal and installation; essential when every minute counts to get out in time for a session or race.
In addition, the spacers are all made out of high quality aluminium (6061-T6) instead of steel giving a useful saving of 65% in important unsprung weight.
Finally, we provide a complete set of high quality Japanese Koyo wheel bearings to replace the not so good ones supplied from the factory.
All in all, a useful and inexpensive upgrade. Now you really are ready to race!
Included in this kit are the following components:
Bearings
front wheel x 2
rear wheel x 2
sprocket carrier x 2
seals
front wheel x 2
rear wheel x 2
spacers
front wheel, left, right and centre
rear wheel, left, right, centre and sprocket carrier
Note: This product is only sold as a complete kit, and individual items are not available separately, sorry.
TYGA no: TPER-2003 orange
SKU: ktm-10187 Categories: ALL products, CNC parts, CNC parts, CNC parts, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 125/200, RC 390, Shop, Various partsSet full race system high level with stainless silencer with carbon cap, Honda MSX125SF GROM
€490.49
Set, Pipe, Full Race System, High Level, MSX125SF Grom, Stainless Oval/Carbon End Cap. Second Generation.
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Total weight of the set is 2300 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043)
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0065 Moto Maggot High level System for 2016 MSX125SF second generation Grom
EXPS-0066 Carbon Oval High level System for 2016 MSX125SF second generation Grom
Note: Some modification of the stock Honda rear hugger (no modification required if using the hugger BPCH-7028 and BPCH-7128) and stock Honda rear fender is necessary to install this system.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0067
SKU: MSX-10338 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, ShopRacing Step Kit, VJ23 RGV250
€355.59
VHM cylinder head (2 pieces), RGV250 / RS250 (alg-10092)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website, for use on the Suzuki RGV250, and also Aprilia RS250.
VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.
During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design. Combustion chambers are available in different volumes.
This head set comes with following parts:
2x cylinder head
2x standard insert (12.0cc)
Other options:
11.80
12.00 (standard)
12.20
12.40
12.60
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Top triple clamp CNC black , Honda RVF400 -> CBR600 fork
€263.52
Top Triple Clamp, CNC silver, CBR600RR forks NC35/MC21/MC28 Conversion
CNC designed and manufactured in house as a direct replacement for the standard top triple clamp. Facilitates mounting holes for securing the ignition switch holder assy TYLY-0041 for use on NSR conversion or TYLY-0042 for NC35 conversion.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
Tyga Step Kit Replacement Peg Spacer, Silver, MSX125 Grom
€9.68
Tyga Step Kit Replacement Peg Spacer, Silver, MSX125 Grom
Coolant System Silicone O-Rings, 5 pieces, Honda CBR250RR MC22
€16.86
Silicone Hose Kit, 6 pieces, Honda CBR250RR MC22
LiteTek Silicone Hose Kit, 6 pieces, to suit Honda CBR250RR MC22
3 ply polyester reinforced
Consist of the following hoses:
1x Hose A, Water Pump Inlet (OE part nr: 19501-KAZ-000)
1x Hose B Water Pump Outlet (OE part nr: 19061-KY1-000)
1x Hose C Radiator Inlet (OE part nr: 19502-KAZ-000)
1x Hose D Engine Outlet Left (OE part nr: 19066-KAZ-000)
1x Hose E Engine Outlet Right (OE part nr: 19068-KAZ-000)
1x Hose F Hose (OE part nr: 19521-KAZ-000)
TYGA no: COK-001
SKU: alg-10359 Categories: ALL products, Carburettor Service Kits,, CBR250RR MC22, HondaCarbon exhaust guard set, Honda CBR250 2011
€195.42
This lightweight carbon exhaust guard set coprises of front and rear guard and replaces the ugly heavy stock item and will enhance the beauty of your CBR.
Not. Product can be supplied without badge if you prefer. Just state ‘no badge’ in the comment box when ordering and we will supply unbadged.
TYGA no: BPCC-0016A+B
SKU: hon-10311 Categories: ALL products, Bodywork and carbon, Carbon, CBR250R 2011 - 15, Honda, Shop