Pillion seat cover “carbon”, KTM RC390 2022 –
€177.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCX-7731
SKU: ktm-10209 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsClamp, Manifold, NC30/35
€18.96
Manifold Clamp. Fitted to rear cylinder port. For use with:
EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)
EXPS-0011 Set, Pipe, Full Race System NC30-35 Maggot Silencer
EXPS-0028 Set, Pipe, Full Race System NC30-35, Oval Carbon/Carbon End Cap Silencer
EXPS-0012 Set, Pipe, Full Race System NC30-35, Oval Stainless Silencer
EXPS-0053 Set, Pipe, Full Race System NC30-35, Round Aluminium Silencer
EXPS-0010 Set, Pipe, Full Race System NC30-35, Round Carbon Silencer
EXPS-0026 Set, Pipe, Full Race System NC30-35. Round Carbon/Carbon End Cap Silencer
EXPS-0003 Set, Pipe, Twin Stack System, Carbon Silencers
EXPS-0005 Set, Pipe, Twin Stack System, Stainless Silencers
TYGA no: EXMC-0008a
SKU: hon-10854 Categories: ALL products, Exhausts, Exhausts, Exhausts, Stock list, all modelsUnder Cowl, Belly Exhaust Type, (GRP), White, MSX125
€196.87
Under Cowl, Belly Exhaust Type, (GRP), White, MSX125
Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. Although this will fit all MSX125 Groms with stock Honda or TYGA exhausts, it was designed specifically to be compatible with low mount belly exhausts including:
– Honda low mount stock exhausts supplied with the second generation 2016 MSX125SF models
– TYGA belly exhausts EXPS-0064 and EXPS-0068 (which are suitable for all model MSX125SF Groms)
See table below for more information.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<a href= {{media url= wysiwyg/46-undercowl-bpfl-cl-7328-online-e5eb2cb5.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFL-7328 W
SKU: MSX-10367 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopTube, Carbon, Round, 83mm x 350mm
€106.11
made from high TG resin and 2/2 weave twill carbon cloth, this replacement tube is suitable for the following TYGA Performance exhaust silencers. It is also suitable for other manufacturers’ silencers of the same dimensions. See below for exact specifications
Inner cowling (GRP) stock shape, Yamaha TZR250 3MA
€106.61
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
TYGA no: BPFC-7052
SKU: yam-10092 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Shop, TZR250 3MA, YamahaSwitch assy winker , Honda MSX125 GROM
€42.16
Switch Assy. Winker
TYGA no: 35200-K26-901
SKU: MSX-10009 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarbon tank shrouds with duct and grill, Honda MSX125 GROM
€172.49
Tank Shrouds, With Duct and Grille, (Pair), (Carbon), MSX125 Grom. Looks cool and makes your bike stand out from the crowd.
TYGA no: BPCX-7828
SKU: MSX-10179 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopVHM Cyl. Headset Husqvarna TC250 ’14
€327.95 €284.25
VHM Cyl. Headset Husqvarna TC250 ’14 -> (alg-10216)VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (21.80cc)Optional inserts:– blind– 20.60– 21.00– 21.45– 22.20This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33098.
SKU: alg-10216 Categories: ALL products, Husqvarna MX, Motocross, Shop, VHM products