TYGA / Kitaco Power up kit stainless , Honda MSX125 GROM
€741.04 €666.94
TYGA/KITACO Power Up Kit, Stainless Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0052 Set, Pipe, Full Race System, MSX125 Grom, Stainless Oval/Carbon End Cap
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA no: TPER-0096
SKU: MSX-10304 Categories: ALL products, Exhausts, Exhausts, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopSet exhaust, race system double maggot , KTM RC390 2014 – 2016
€726.37
.Set, Pipe, Race System, RC390, Stainless Moto Maggot
Update your bike with this great TYGA performance, KTM power part!!
This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual under seat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected than systems which have the exhaust exiting the right of the swing arm. The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is not supplied or compatible with a decibel killer for noise reduction and is very loud! Please be warned!
Compatibility
This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.
For use with standard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.
Please also see EXPS-0062 for similar system.
** Attention ** if you have the EURO 4 type RC390 2016, this means with the exhaust on the right side, not the exhaust under the engine. This exhaust won’t fit, because the header is different. You need to order the full system. Please see product: ktm-10092 / ktm-10093.
Customization
Performance and Dynograph
Please refer to dynograph
A) All Standard.
B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition map
C) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition map
Very useful gains especially in the mid range for both B) and C), for much stronger acceleration.
The silencer was full bore. No decibel killer used.
This system may not comply to specific country noise emission regulations and is not homologated for street use.
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0062
SKU: ktm-10059 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopBall, Steel #8, MC28SP
€0.73
Ball, Steel #8, MC28SP
TYGA no: 96211-08000
SKU: hon-11095 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Seat set Tyga doubleseat, NC30
€264.89
This is the GRP seat cowling used in the NC30 Two Seat Cowling kit, BPFS-0078.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
rear fender special BPFX-9117
taillight BPLT-0013
TYGA no: BPFT-9117
SKU: hon-10090 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Carbon front fender, Honda Hawk/Bros
€153.21
Front Fender, Carbon, Hawk/Bros
This carbon version of the stock front fender will enhance the beauty of your Hawk and make it stand out from the crowd!
TYGA no: BPCF-7066
SKU: hon-11166 Categories: ALL products, By model, Hawk/Bros 400/650, Honda, ShopCarbon belly pan, KTM Duke 125/200
€289.56
This lightweight carbon belly pan, complete with mesh weighs less than the stock one and adds style to your ride.
Please note, this product fits the 125 and 200 only. Due to the engine being larger, this product can not be installed on the 390. For 390 Duke, please see product BPCL-7031.
Update your bike with this great carbon product, direct replacement of the original part
TYGA no: BPCL-7131
SKU: ktm-10007 Categories: ALL products, Carbon, Duke 125/200 2012- 16, KTM, ShopClutch plate B, Honda NSR250 MC21/MC28
€45.13
Clutch plate B, Honda NSR250 MC21/MC28
TYGA no: 22202-KV3-980
SKU: hon-10574 Categories: ALL products, Honda, NSR250, NSR250 MC21, NSR250 MC28, Various parts, Various partsGasket exhaust, Honda VFR400 NC30 / RVF400 NC35
€3.92
Compatible with:
With NC30/35 exhaust systems including TYGA systems (included in set EXPS-****). Suitable for most Honda four stroke systems.
TYGA no: 18291-MN5-650
SKU: hon-10503 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Honda, RVF400RR NC35, Shop, Various parts, Various parts, various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97