Seat cowling (grp) Singel stock shape street, Honda RVF750 RC45
€242.59
Seat Cowling, GRP, RC45, Single, Stock Shape, Street
Stock shape seat cowling, with taillight holes. Single seat, direct replacement for stock RC45 seat cowling in the same shape.
Please note, to order this product without taillight holes, please order BPFT-7141.
Retains use of Honda OEM seat pad
Kit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)
€2,468.27
Kit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)
Complete Carbon Bodywork kit which consists of the following products:
Upper Cowling Race, Carbon, NX5 RS250R (Late Model Style) (BPCU-9036)
The Carbon upper fairing is modelled off the 1995 NSR250 racer but will fit any NX5 which has the ram air through the fuel tank system.
Lower Cowling, Carbon, NX5 RS250R (Late Model Style) (BPCL-9036)
The Carbon lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.
Seat Cowling Race, Carbon, NX5 RS250R (1995 NSR250 Style) (BPCT-9036(p))
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors.
Seat Support NX5 RS250R (BPCX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
Made to order, takes approx 1 to 2 weeks to be ready for shipping
TYGA no: BPFS-0189
SKU: hon-10977 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopKit, Fairing Set (GRP), Honda NX5 1993 RS250R (early model style)
€870.62
Kit, Fairing Set (GRP), Honda NX5 RS250R (1993 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Lower Cowling, (GRP) NX5 RS250R (1993 Style) (BPFL-9136)
The lower fairing is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9236
Seat Cowling Race (GRP) NX5 RS250R (1993 Style) (BPFT-9236)
The seat cowling is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock subframe as far as we can tell. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
TYGA no: BPFS-0180
SKU: hon-10940 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopLower cowling (GRP) stock shape, Honda NSR250 MC18
€263.33
Lower Cowling (GRP), Stock Shape, 1989 NSR250, MC18
Replacement part, to be used with Upper Fairings BPFU-9123 and BPFU-9222
See also BPFS-0173 and BPFS-0174 for complete sets with upper, lower fairing and screen.
TYGA no: BPFL-9122
SKU: hon-10917 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopHandle bar set silver, Honda CBR500
€234.92
Handlebar Set, Silver, CBR500R.
This CNC machined handlebar set is designed to change the handlebars to be up to 25 mm. lower from the stock position giving a more sporting riding position. The ergonomics work very well allowing more weight over the front end for better control, while putting the rider’s upper body lower behind the fairing for better areodynamics and less fatigue at high speed riding.
Black, order TYLY-1669
Silver, order TYLY-0669
Please note the steering is limited when using this product and as a result, the steering lock cannot be used.
Lower cowling, Suzuki RGV 250 stock race , assy
€181.67
Lower Cowling (Race, GRP), VJ22, Stock Shape, Assy.
This lower cowling is modelled from the origial stock VJ22 shape and is suitable for all race classes but particulary those where the you need to keep the stock silhouette. Note that this panel splits the fairing into two parts in away to make it easy to remove at the race track. Constructed with epoxy resin and multi layer 200 gram mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
It is to be used with BPFU-9226 upper cowling to complete the fairing. It has an enclosed belly pan for fluid retension to comply with racing classes where this is a requirement.
NOTE: This product is compatible with upper cowling BPFU-9226. Will not fit stock Suzuki upper cowling.
TYGA no: BPFL-9226
SKU: suz-10093 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiFork Caps, Silver/Black, Full adjustment, Honda MC18/MC21/MC28/NC30
€249.74
Fork Caps, Silver/Black, Full adjustment.
Many race replica street bikes are graced with adjustable suspension as standard, but as with many ‘so-called’ adjustable suspension systems on production bikes, the actual adjustment available is very limited. The manufacturer lets you adjust within very tight parameters so that it’s difficult to get the settings wrong.
The TYGA fork tops do away with this dictator attitude, allowing you to take control of your set-up.
The preload adjustment is increased, with an extra 4mm possible, and we also provide a full 20 clicks of rebound adjustment that works!
Another great feature is the easy-turn knob for rebound adjustment. No more fumbling around for the screw driver.
The fork tops are manufactured from top quality anodized 6061 T6 aluminium and come ready to install, and are a direct replacement for the standard parts. Securing to the fork tube is by a pin spanner that is provided.
Basic suspension rebuild skills are useful for fitting, but full instructions will be provided.
Fits MC21SE/SP, MC28SE, MC18SP & NC30.
Also available in Blue/Red see TYLY-0038
Please note that these Fork Caps will not work with ‘R’ spec NSR forks, or ’89 NC30, as these are preload adjustment only type forks.
TYGA no: TYLY-1038
SKU: hon-10967 Categories: ALL products, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Top triple clamp set CNC black, Honda VTR1000 SP2
€327.34
CNC machined top triple clamp for your SP1. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Facilitates mounting holes for securing the ignition switch holder assy (TYLY-1157).
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.