Exhaustset stainless steel carbon silencer round, Kawasaki ZXR250
€639.76
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round carbon silencer EXSL-0032
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.P Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifold<iframe width="560" height="315" src="https://www.youtube.com/embed/z5hGKrpQ56c" frameborder="0" allowfullscreen></iframe>
TYGA no: EXPS-0015
SKU: kaw-10017 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopCarbon race airbox, Suzuki RGV250 VJ22
€496.10 €412.40
Carbon race airbox, Suzuki RGV250 VJ22 (suz-10098)
Our race airbox is inspired by the GP road racing technology, taking advantage of a front air intake and all available space within the engine compartment.
And by using the lower part of the fuel tank as closing to increase the volumetric capacity of which becomes 9.5 lt against 6.2 lt of the standard component ( 53%).
The air intake (Snorkel) is positioned in the front to be able to suck a greater amount of air and with less turbulence than the positioning adopted in origin ( in the back)
Its shape also was designed using the calculation FEM (Finite Element Method) to minimize the load losses and therefore increase performance in the complete range of the RPM.
The kit also includes a carbon cover to be mounted close to the air intake to prevent suction of hot air.
All this is mainly reflected in an increase in engine performance, as shown below on the Dyno graph.
Greater maximum power ( 3 hp *)
Better throttle response
Higher max. RPM ( 500 rpm)
A GP “sound”
Improved access for maintenance
jet #310 – #320 (*)
Also be using Carbon you will have weight reduction of around 50% (465 grams compared to 970 grams OEM).
The filter is washable and gives better performance then original
* Standard engine
Please note, the rubber airbox manifolds are not with the airbox. You have the reuse the original ones.
TYGA no: special015
SKU: suz-10098 Categories: ALL products, High performance, High performance, RGV250 VJ22, Shop, SuzukiCarbon license plate frame, USA spec.
€75.79
License Plate Frame, (Carbon), USA Spec
This is a real carbon fiber motorcycle license plate frame made by TYGA Performance and is made to fit the standard size US motorcycle license plates. It’s perfect for those motorcycle enthusiasts who love carbon fiber parts on their beloved bikes or who just simply want to add a performance touch.
Please note that this license plate frame is made of real carbon fiber and not aluminum/ plastic with carbon fiber look, those prints will fade and discolor over time.
Package will include 1 real carbon fiber motorcycle license plate frame that fits onto standard size US motorcycle license plates; screws are not included for the installation.
TYGA no: BPCC-6002
SKU: MSX-10466 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Various parts, Various partsSection, Header, Front Left, Stainless, VFR750F, 3rd Gen, 90-93
€122.86
TYGA no: EXPT-1151
SKU: hon-11346 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Carbon Side cowling B left , KTM RC125/RC200/RC390
€300.99
Side Cowling B, Left, Race (Carbon), KTM RC125/200/390
This lightweight carbon side cowling replaces the heavier stock plastic item. Ideal for racing.
Must be used with:
BPFX-7231L TYGA Performance Side Cowling A, Left, Race (GRP), KTM RC125/200/390.
BPCX-7231L TYGA Performance Side Cowling A, Left, Race (Carbon), KTM RC125/200/390.
Our fairing has the same shape as the original KTM side cowlings, but we have made some updates on the product which makes it stronger and easier to instal.
The TYGA side cowling work together as a set, the original KTM fairing won’t fit the TYGA and vice versa.
When you want to order make sure you order A B.
Update your bike with this great TYGA performance, KTM power part!!
TYGA no: BPCX-7331L
SKU: ktm-10050 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, KTM, RC 125/200, RC 390, ShopSeat Cowling (GRP) MC18, Stock Shape, Street
€263.33
Seat Cowling (GRP), NSR250 MC28, Stock Shape, Street.
This seat cowling is a direct replacement for the stock plastic seat cowling and is exactly the same shape
TYGA no: BPFT-0022
SKU: hon-10911 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopClutch parts, Suzuki RGV250 / Aprilia RS250
€1.17
Clutch parts, Suzuki RGV250 / Aprilia RS250
Used but in good condition.
Picture shown is random, let us know the exact clutch part you need and we availability and price.
We have many spares for RS250 and RGV250, not all parts are online.
Just send us an email for availability.
*** no returns on used parts ***
O- ring for exhaust, RGV250 / RS250
€5.97
Replacement O rings for the TYGA exhaust manifold used with the TYGA expansion chamber.
Remember to order four of these items to service both expansion chambers.
This is a replacement part. When ordering chambers, this item is included in the price and you do not need to order this parts separately.
Compatible with the following TYGA systems:
EXCS-0007
EXCS-0008
EXCS-0009
EXCS-0010
EXCS-0011
EXCS-0014
EXCS-0016
EXCS-0018
TYGA no: EXOR-0001
SKU: alg-10024 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, Exhausts, RGV250 VJ21, RGV250 VJ22, RS250, Shop