Carbon exhaust guard front , Honda CBR250 2011
€85.28
This lightweight carbon exhaust guard replaces the ugly heavy stock item and will enhance the beauty of your CBR.
TYGA no: BPCC-0016B
SKU: hon-10307 Categories: ALL products, Bodywork and carbon, Carbon, CBR250R 2011 - 15, Honda, ShopPiston Circlip 15mm, MC16~28
€1.05
Piston Circlip 15mm, MC16~28
TYGA no: 94601-15000
SKU: hon-11096 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28Exhaustset stainless steel carbon silencer round, Honda CBR150
€520.76
This full race system has been specifically designed for the CBR150 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves 4.8 kg in weight (TYGA system 1.4 kg, stock system 6.2 kg!) and enhances the looks of the bike. Sounds great too!
TYGA no: EXPS-0008Â
SKU: hon-10286 Categories: 4 stroke exhaust sets, ALL products, CBR125R/CBR150R 2004-10, Exhausts, Honda, ShopHandle bar clamp left ” hinge type” black, KTM RC390 2014 -24
€106.61
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731L
SKU: ktm-10213 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsTriple clamp set CNC black, Honda VFR400 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR forks to fit VFR400R, NC30
CNC machined TYGA lower triple clamp for the NC30 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your order that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1944
SKU: hon-10618 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30set exhaust pipe stainless steel no silencer
€492.45
Set, Exhaust Pipe, Race System, Yamaha R25/R3, Stainless, No Silencer
This race system has been specifically developed for the Yamaha YZF R25 and YZF R3 and has been designed for optimum performance. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome! Note this system does not include any silencer (muffler). Please see olur other exhausts EXPS-00072, EXPS-0073 and EXPS-0074 for complete systems including silencer.
Compatiblity
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
No modification of bodywork is required, however, the emission canister must be relocated using the clamp provided.
Please also see EXPS-0072 EXPS-0073 and EXPS-0074 for similar system.
Performance and Dynograph
Please refer to dynographs for TYGA fulls ystem with silencer installed
A) All Standard.
The standard exhaust system is replaced with the TYGA system. No modifications to the engine or fuelling were performed. Fitting a fuel controller could further increase the performance gains.
B) Airfilter/Airbox modification.
The standard exhaust system is replaced with the TYGA system. The airbox cover has been removed and a high flow filter fitted. This improves power all through the range. Fitting a fuel controller could further increase the performance gains.
TYGA no: EXPS-0075
SKU: yam-10062 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Yamaha, YZF-R25/R3Kitaco PC-USB interface cable, Honda MSX125 GROM
€123.42
KITACO PC-USB Interface Cable
This interface cable links your KITACO i-Map Fuel Injection Controller to your PC, and allows you to build a custom fuel map.
The necessary software is downloadable from the KITACO website: i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA no: Kit-763-0500900
SKU: MSX-10307 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopKit, Bodywork, GRP, stock shape, NSR250 MC21, Painted Rothmans
€1,604.24
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Please note this product is only available for delivery in 7 days
TYGA no: BPFS-0205
SKU: hon-11280 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC21, Shop, Silencers