Castle nut tool, Honda MC21 NC30 NC35
€30.04
Tool to loosen/tighten the castle lock nut that secures the swingarm adjuster bolt on the NSR250 MC21. Also used for the castle locknuts on the adjusters that hold the NC30/35 engine in position. No more need for a hammer and drift, do the job properly!
Does not fit the swing arm lock nut on MC28 or NC30/35
TYGA no: TYTO-0008
SKU: hon-10521 Categories: ALL products, Honda, NSR250 MC21, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, VFR400RR NC30Set pipe Full race system WSS300 (race), KTM RC390
€1,155.39
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0112
SKU: ktm-10147 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsCarbon engine covers pair 2016 – , KTM Duke / RC390
€240.76
Carbon engine covers pair 2016 – ’20, KTM Duke – RC390
This engine protective cover set is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
Note: This product does not fit the 2014-2015 model KTM RC390 due to a revised design of the left side engine cover.
2014-2015 Model: Left engine case, KTM part number: 90230002133 (BPCC-7331L fits). Choose BPCC-7331 not BPCC-7531 if you would like to order set of left and right cases.
2016-2017 Model Left engine case, KTM part number: 93730002000 (BPCC-7531L fits). Choose BPCC-7531 not BPCC-7331 if you would like to order set of left and right cases.
TYGA no: BPCC-7531
SKU: ktm-10081 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, CNC parts, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 390, RC390 2022-Section header #3-4 stainless, Kawasaki ZXR400L
€234.71
Section, Header, #3-4, Stainless, ZXR400L
Header section, Cylinder 3-4, used on TYGA-Performance Kawasaki Exhaust Systems:
EXPS-0137
EXPS-0138
EXPS-0139
EXPS-0140
Front fender “stock shape, Honda RS250 NX4-NX5
€55.20
Front fender stock shape, Honda RS250 NX4-NX5
Same shape as original
Compatible Parts:
All Tyga Performance and Honda OEM panels.
TYGA no: BPFF-0006
SKU: hon-10607 Categories: ALL products, Bodywork and carbon, Honda, RS250R NF5 / NX5, ShopFly screen H2C black, Honda MSX125 2021
€55.41
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: APK26PL64100ZA
SKU: msx-10473 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopCarbon front brake reservoir stay, Honda NSR250
€36.48
Replacement for tired the stock front brake resevoir stay. This trick carbon stay can be used as a direct replacement for the heavy steel one on the NSR250. It weighs about 25% of the original and as well as being stiff and strong, looks like it belongs on a GP bike.
Beautiful, perfect fitment and give your bike that HRC look.
TYGA no: BPCC-9015
SKU: hon-10408 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopSubframe aluminium , Honda VFR400 NC30
€453.76 €408.41
This lightweight aluminium subframe is closely modelled on the stock NC30 subframe and can be substituted for the heavy steel one with a considerable weight saving . Made from extruded and CNC machined 6000 series aluminium, this product is hand-welded by our craftsmen to provide a strong, accurate and beautiful component. Finished in Hard wearing satin black powdercoating, it can be painted if the customer so chooses.
Note this subframe is for race and single seat use only and cannot be used for carrying a passenger. All mounting positions for exhaust stay, seat cowling, undertray, rear shock reservoir (BPCC-0046 is a direct fit), radiator overflow bottle, electrical components etc which are normally mounted to the subframe are supplied with subframe so it is almost a simple plug and play. Most of the standard fasteners are used, however where necessary, replacements are included.
If you wish to run this subframe without the rear fender, then this is also possible and we recommend installing it along with Seat cowling bracket part number: TYLY-0224-17 and battery box TYLY-0026. In this configuration, you will need modify the rear mounts of the battery box and drill them to attach to the subframe and to cable tie the ECU, starter relay etc which are normally attached directly to the undertray.
TYGA no: TYLY-0224
SKU: hon-10984 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, Various parts, VFR400RR NC30