Front fender (grp) stock shape, Honda RS250R NXA
€80.91
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Handle bar tube (275mm) silver, Honda RS250 NX5/NXA
€22.89
Handlebar Tube, (275mm) Silver (Assy)
Handlebar Tube, Silver (Assy),Suitable for both left and right sides.
The Handle bar diameter is 7/8” (22.2mm)
Comes fitted with plastic bungs in each end.
TYGA no: TYLY-0569
SKU: hon-11214 Categories: ALL products, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, ShopRear Brake Light Switch Kit
€13.49
Rear Brake Light Switch Kit. Please specify the model you will be using this on because the spring length varies.
Note you will need to drill and tap a hole in the underside of the rear brake lever, if it has not already been done, in order to install this kit.
Bodywork Set 1, GRP, Painted RC36-2 RC30 Style, Street
€4,486.65 €4,262.31
Bodywork Set 1, GRP, Painted RC30, RC36-2 RC30 Style, Street
Due to high demand, please allow 1-2 months after placing your order for the painted parts to be ready
SPECIAL INTRODUCTORY PRICE FOR PAINTED KIT
Consist of:
- BPFU-7049 Upper Cowling, GRP, RC36, RC30 Style, Street
- SCRE-0182 Screen, RC36-2, RC30 Style, Street
- BPFL-7049 Lower Cowling, GRP, RC36, RC30 Style, Street
- TYBP-0006 Hardware, Cowling, GRP, RC36, RC30 Style, Street
- BPFT-7049 Seat Cowling, GRP, RC36, Single, RC30 Style, Street
- TYLY-0314 Subframe Set, RC36-2, RC30 Style, Street
- BPFG-0009 Fuel Tank, GRP, VFR750 R36-2, RC30 Style, Unpainted
- TYBP-0009 Fitting Kit for Fuel Tank, RC36-2, RC30 Style
- TYLY-0318 Fuel Tap Extension, RC36-2, RC30 Style
- TYLY-0305 Upper/Mirror Stay, 40mm, RC36, RC30 Style
- TYLY-0317 Meter Stay, RC36-2, RC30 Style
- BPFC-7049 Frame In-Fill Panel, GRP, Pair, RC36-2, RC30 Style
- TPER-0113 Steering Stopper, Honda VFR750R RC36 (94-97)
- 16956-MT4-000 Fuel Hose, RC36/1
- BPSP-0012 Bum Stop, RC30 Style, Replacement
- BPSP-0013 Seat Pad, RC30 Style, Replacement
- TYPP-0036 Lock Assy. RC36-2, RC30 Style.
- BPAC-0015 Set Windscreen Molding and Clips
- TYPA-0025 Paintwork, RC30 Scheme
Choose between 40mm (default) and 30 mm mirror pitch
Note: All parts used for the RC36-2 RC30 replica can be ordered individually. Please see here for the complete parts list, click on images below to open product page for that particular component for more information and photos.
40mm pitch mirror version is provided unless you specify 30mm in the comment box at check out
TYGA no: BPFS-0240
SKU: hon-11530 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, Stocklistfairing set race RC211V, NC30 kit
€807.58
Fairing set race RC211V, NC30 kit
This set of bodywork comprises of the parts shown in the picture which are also available separately
*A clear screen is provided.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0012
SKU: hon-10064 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Undertray seat cowling VJ21 TYGA, Suzuki RGV250 VJ21
€73.06
Undertray (GRP), GP Seat, VJ21, Assy. 1
This is the all GRP undertray used in theGP style seat cowling kits for the VJ21, sets BPFS-0121 and BPFS-012218.
This product is suitable as a replacement in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the VJ21.
To be used with
seat cowling BPFT-9021
TYGA no: BPFX-9021
SKU: suz-10104 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Carbon cover center RR, Honda MSX125 2021-
€91.54
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCX-7448
SKU: msx-10508 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopMeter Stay, NC35 T13 Cowling Type, Assy.
€86.26
Lightweight laser cut steel stay designed specifically to mount the T13 style fairings BPFU-9218, BPCU-9218 and retains stock instrument cluster for the NC35.
Do not use with other model fairings.
Compatible with:
TYGA T13 kits for the NC35
TYGA no: TYLY-2018
SKU: hon-10820 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35