Fork cap kit, Kawasaki ZXR400L
€317.71
After 20 years or so of hard use, many ZXR’s have damaged or scruffy fork caps. We know that it can really detract from an otherwise well restored bike if the fork caps are scuffed or dinged up. We therefore decided to reproduce the fork caps both for our collection and to offer to the public at the same time. CNC machined from 7075 T6 aluminium and brass and with the clear anodizing, just like the original OEM parts, these fork caps are the finishing touch of any ZXR400 restoration and install exactly the same as the original parts.
The 3 legged Spring Adjuster Plate is not included in this kit. Please reuse the original part.
Carbon passenger seat cover, Ducati monster 696/795/796/1100
€167.82
Passenger Seat Cover, (Carbon), Ducati Monster
Section header for TYGA exhaust, KTM RC390
€195.20
Section, Header,Stainless, KTM RC390
Header exhaust, designed for unimpeded flow. Unlike the stock KTM header for the RC390, which has creases and dents to fit between the frame and engine, the TYGA header has been carefully fabricated to retain the round cross sectional area throughout, to avoid turbulent gas flow. Complete with Lambda sensor bung in the original position.
Compatible with the following exhausts:
Compatible with 2014-2016 KTM stock exhaust and other systems using the stock KTM header for those years.
Compatible with 2014-2016 TYGA exhaust systems EXPS-0061 and EXPS-0062
Included with 2017 on TYGA exhaust systems EXPS-0091 and EXPS-0092
TYGA no: EXPT-0003
SKU: ktm-10087 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopFront brake reservoir cover TYGA, Honda MSX125 GROM
€40.63
Front Brake Reservoir Cover, BLACK, TYGA Performance. Finished in MSX125 Grom logo
Light weight and good looking. Anodised for a long lasting finish. available in a variety of other colours. See photos.
TYGA no: TYLY-2101-
SKU: msx-10197- Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, Various partsClutch lifter plate, Honda Monkey 125 2022
€26.82
Rear Fender, Carbon, stock shape, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
IMPORTANT, Rear fender BPCH-7042 is not compatible with the Honda number
plate holder (part number 80100-KOF-T00 ) due to the weight of the Honda
part. We recommend when installing BPCH-7042 that TYGA registration holder
BPCK-7142 is installed instead
TYGA no: TYLY-0167
SKU: msx-10514 Categories: ALL products, High performance, Honda, Shop, Various partsSection, Final, Slash Cut Slip-On type, Stainless, R25/R3
€60.40
Section, Final, Slash Cut Slip-On type, Stainless, R25/R3
Used with exhaust system EXPS-0071
Screen clear TYGA upper fairing, RC125/RC200/RC390
€52.00
Screen, KTM, RC series Upper Fairing
Replacement screen for KTM RC series Upper Cowling sets BPFS-0170 and BPFS-0171
TYGA no: SCRE-0167
SKU: ktm-10100 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200Side mount lower cowling, Honda VFR400 NC30
€9.04
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPSY-0323
SKU: hon-11390 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, Various parts, VFR400RR NC30