Carbon/kevlar Airbox , Honda RS250 NX5
€520.00
Air Box, Carbon/Kevlar, RS250, NX5
This high quality carbon/Kevlar air box is a direct replacement for the stock HRC one (80101-NX5-770) It is supplied ready to install and includes the following actual HRC or equivalent TYGA aftermarket parts:
Ref Part Number Description Qty Req
1 55204-GJ2-000 GROMMET, OIL TUBE 2
2 64234-NX5-770 SEAL,GAP 3
3 80101-NX5-770 BOX,CARBRETOR (se) 1
4 80102-NX5-770 RUBBER,BOX SIDE 2
5 80108-NX5-770 FILTER,CARB BOX 1
7 90108-GK1-000 BOLT, FLANGE SH (6×12) 2
8 90652-ND5-000 TY-WRAP (2.4×92) 5
9 90654-NX5-770 STUD, FASTENER 35 1
10 90655-NX5-770 GROMMET, FASTENER 1
11 90656-NX5-770 SPRING,FASTENER 35 1
12 90754-NX5-770 STUD, FASTENER 30 (se) 1
13 90755-NX5-770 GROMMET, FASTENER 1
14 90756-NX5-770 SPRING, FASTENER 1
15 91082-NF5-000 RIVET, BLIND (2.4×5.7) 4
TYGA no: BPCX-0004
SKU: hon-10683 Categories: ALL products, Bodywork and carbon, By model, By product, Carbon, Honda, RS250R NF5 / NX5, Shop, Various partsSeat pad large , flat
€46.69
Vinyl covered medium density foam race seat pad provides a maximum amount of feedback from the bike and minimum comfort!
Underside of seat has velcro stitched in. Kit is supplied with a strip of Velcro with strong 3M adhesive tape appied on the underside. Easy installment. Cut the strip to size using scissors, one each side recommended. Then simply peel back the protective layer on the adhesive strip, lay the strips on the seat cowling and place the seat pad in position.
Compatible Parts:
Tyga Tail cowling: BPFT-9030 BPFS-0102 and BPFS-0103
Triple Clamp Set, 3D, CNC Silver, CBR600RR Forks to fit MC18
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3302
SKU: hon-11268 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsFork Caps, Silver/Black, Full adjustment, Honda MC18/MC21/MC28/NC30
€249.74
Fork Caps, Silver/Black, Full adjustment.
Many race replica street bikes are graced with adjustable suspension as standard, but as with many ‘so-called’ adjustable suspension systems on production bikes, the actual adjustment available is very limited. The manufacturer lets you adjust within very tight parameters so that it’s difficult to get the settings wrong.
The TYGA fork tops do away with this dictator attitude, allowing you to take control of your set-up.
The preload adjustment is increased, with an extra 4mm possible, and we also provide a full 20 clicks of rebound adjustment that works!
Another great feature is the easy-turn knob for rebound adjustment. No more fumbling around for the screw driver.
The fork tops are manufactured from top quality anodized 6061 T6 aluminium and come ready to install, and are a direct replacement for the standard parts. Securing to the fork tube is by a pin spanner that is provided.
Basic suspension rebuild skills are useful for fitting, but full instructions will be provided.
Fits MC21SE/SP, MC28SE, MC18SP & NC30.
Also available in Blue/Red see TYLY-0038
Please note that these Fork Caps will not work with ‘R’ spec NSR forks, or ’89 NC30, as these are preload adjustment only type forks.
TYGA no: TYLY-1038
SKU: hon-10967 Categories: ALL products, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Carbon rear seat, Aprilia RS250
€773.53
This seat cowling is to be used in our Aprilia RS-250 kits, BPFS-1102.
This product is compatible with Sub frame TYLY-0065. Will not fit stock Aprilia subframe
TYGA no: BPCT-9030
SKU: apr-10071 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopHandle bar bung (pair), Honda RVF400 NC35
€12.47
Seat Cowling, (GRP), NC30/NC35 GP-T
This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0148 (GRP, NC30)
BPFS-0149 (GRP, NC35)
BPFS-0150 (Carbon, NC30)
BPFS-0151 (Carbon, NC35)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T
TYLY-0133 Subframe, NC30/NC35 GP-T
TYLY-0130 Batterybox NC30/35 GP-T
BPFX-9234 Seat Support, NC30/NC35 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
Triple clamp set CNC silver, NC35
€673.57
CNC machined TYGA triple clamp set for your RVF400 NC35.
These stylish, all aluminium triple clamps are a direct replacement for the notoriously easy to bend, OEM NC35 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0242
SKU: hon-10158 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, ShopSet full race system with moto maggot silencer, Honda MSX125 GROM
€409.54
Set, Pipe, Full Race System, MSX125 Grom, Moto Maggot. First Generation
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Total weight of the set is 2300 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043), and Carbon Silencer (EXSL-0042). Similar results would be expected with the Maggot.
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0041 Carbon Oval Silencer System
EXPS-0052 Stainess Oval Silencer System
EXPS-0065 Moto Maggot High level System for 2016 MSX125SF second generation Grom
Compatibility:
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/q4RjGB7doOM frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0042
SKU: MSX-10133 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, Shop