Reed Petal, MC28
€14.91
Reed Petal, MC28
TYGA no: 14111-KV3-832
SKU: hon-11178 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Pro-arm Hub spacer 2mm
€17.91
Pro-Arm Hub Spacer, 2mm
TYGA no: TPER-0014-2
SKU: hon-10687 Categories: ALL products, By model, By product, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various partsHandlebar clamp black, Honda MSX125 GROM
€52.45
Handlebar clamp CNC machined from 6061 T6 aluminium. Light weight and stylish. Available in two colours, silver or black.
Simple replacement for stock clamps, using stock bolts and bolt caps.
TYGA no: TYLY-1095
SKU: MSX-10080 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, Monkey 125 2018-, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, ShopTop end rebuild set Cylinder B, Honda NSR250 MC21/MC28
€293.88
The picture shows everything you need to do a top end rebuild on your MC21/28. One kit includes all parts for one cylinder (cylinder ‘B’). To overhaul both cylinders please order 2 kits.
Honda OEM:
1x Gasket cylinder 12192-KV3-680
1x Gasket head 12251-KV3-830
1x Piston ring 13010-KV3-305
1x Piston no mark 13102-KV3-830
1x Piston pin 13111-KV3-771
1x RC valve shaft E clip 90601-KV3-000
1x Bearing piston 91102-KV3-771
1x Seal, RC valve shaft 91201-PA9-004
2x Dowel cylinder 94301-10160
2x Piston Circlip 15mm 94601-15000
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0001B
SKU: hon-10440 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon exhaust shield, Yamaha R1 2007-8
€161.70
Weighs approx 0.14 kg.
TYGA no: BPCX-7102
SKU: yam-10009 Categories: ALL products, Carbon, Shop, Yamaha, YZF-1000 R1 2007- 8Trottle cable A, Honda NSR250 MC21
€68.40
Throttle Cable A, MC21
TYGA no: 17910-kv3-830
SKU: hon-10706 Categories: ALL products, Honda, Honda OEM products, NSR250, NSR250 MC21, Various partsKit fairing set street GRP stock shape, Honda NSR250 MC21
€766.71
Kit, Fairing Set, Street, GRP, Stock Shape, NSR250 MC21
Complete set of stock shaped bodywork for the Honda NSR250 MC21
Consists of the following products (also available separately)
BPFU-0006 Upper Fairing
BPFL-9001 Lower Fairing
BPFT-9044 Seat Cowling
BPFF-0009 Front Fender
SCRE-0016 Clear Screen
TYGA no: BPFS-0204
SKU: hon-11221 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21Section, Right #1, KTM RC390 Serpent
€45.13
Section, Right #1, KTM RC390 Serpent
TYGA no: EXPT-0055
SKU: ktm-10118 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all models