Kick start plug, NSR250 MC18/MC21/MC28
€9.34
Blanks off kickstart assembly hole when kickstater has been rremoved for racing. Secure with liquid gasket such as Three Bond 1104.
TYGA no: TYLY-0013
SKU: hon-10392 Categories: ALL products, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various partsCarbon splash guard, MSX125 2021-
€249.57
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCH-7428
SKU: msx-10509 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopClutch Pressure Plate, MC28 R
€38.29
Clutch Pressure Plate, MC28 R
TYGA no: 22351-KV3-000
SKU: hon-11152 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Carbon chain guard stock , Honda NSR250 MC21
€75.27
Chain Guard (Carbon), NSR250 MC21
This carbon chain guard replaces the stock plastic part which after 25 years is starting to look a bit faded and battered on most MC21s. By replacing it with the TYGA part, your swing arm will look fresh and tidy!
Note, this product cannot be used with hugger BPCH-0002 without first modifying it because it uses the same mounting hole as the hugger uses.
TYGA no: BPCX-0002
SKU: hon-10570 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, ShopBar end weight (pair), Honda CBR250RR MC22
€21.46
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0322
SKU: hon-11468 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersCarbon exhaust stay, Kawasaki ZXR400L
€95.39
Set, Pipe, Stainless, Full Race System, Stainless Maggot Silencer, ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs.
As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
It uses the TYGA Moto Maggot silencer, this system may not comply to specific country noise emission regulations and is not homologated for street use. Actually it is extremely loud so be warned!.
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
Please also see EXPS-0137, EXPS-0138 and EXPS-0139 for similar system
Tyga Step Kit Replacement Link Rod, 215mm
€16.92
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: STAR-0215
SKU: alg-10427 Categories: ALL products, Carbon, CBR250R 2011 - 15, CBR300R 2014-, Honda, NSR150SP, RVF400RR NC35, Shop, Various parts, Various parts, Various parts, Various parts, Various parts, various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97Stay, Carbon, (Pair) Exhaust, NSR500V Style
€95.39
Stay, Carbon, (Pair) Exhaust, NSR500V Style
To be used with NSR250V Seat cowling BPFT-9043 and BPFT-9142 and Exhaust system EXCS-0047
The seat cowling has threaded holes in the underside to attach exhaust stays TYLY-0243L and TYLY-0243R for use with NSR250V exhaust system EXCS-0047
TYGA no: TYLY-0234
SKU: hon-11046 Categories: ALL products, Exhausts, High performance, Honda, NSR250, NSR250 MC28