Fuel Tank, Carbon, NSR250, MC28, Painted Rothmans
€1,748.21
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPCG-9001Painted
SKU: hon-10972 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersCarbon tank grilles, Honda MSX125 GROM
€95.39
Carbon tank grilles to decorate your MSX125 Grom. Fits over nasty plastic stock items and transforms the appearance of your bike. Install with double sided tape provided or with silicone sealant for a really permanant intallation
TYGA no: BPCC-7128
SKU: MSX-10071 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, Shop2T blank plug, NSR250
€7.37
Replaces the 2T oil injector pump for pre mix use. Secure with liquid gasket such as Three Bond 1104. Must be used with TYLY-0015 Plug holder
Note for blocking the extra 2T feed on later model oil pumps.
On later engines (some MC21 and all MC28, there is an extra oil feed to the cases which can be observed when the oil pump is removed. HRC used to supply a little aluminium plug that you knocked into this extra hole to blank it off. However, that is discontinued so what to do depends on whether the conversion to pre-mix is permanent or not.
If permanant, then we recommend you make sure it’s all clean and degreased, and then fill the hole with epoxy steel. Allow it to cure and it’ll never leak.
If you’re not sure if you’ll ever go back to the oil pump, but would like the option, then we suggest covering the hole with a small thin disc of steel or plastic, and then using a RTV sealant to sort of glue that in place and also block it off. The RTV will stop any leaks, and the small disc will stop any RTV going down the hole. This is then soft enough to be cut away at a later date should you need to.
Compatible products:
TYLY-0015 Plug holder
TYGA no: TYLY-0012
SKU: hon-10388 Categories: ALL products, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various partsCarbon set, Aprilia RS125 (2007-2010)
€412.40
Let you Aprilia Rs125 stand out from the crowd with these beautiful carbon fiber parts, a complete set for the 2007-2010 Aprilia RS125.
Parts are:
Front fender
Rear hugger
Chain guard
Enjoy great savings on product prices and shipping when ordering the parts together in a set instead of separately.
TYGA no: BPFS-0074
SKU: apr-10005 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS125, ShopCarbon tankcover front, 696/795/796/1100
€130.44
Tank Cover, Front, (Carbon), Ducati Monster
Nut, 6mm, L/H thread, MC28
€2.28
Nut, 6mm, L/H thread, MC28
TYGA no: 90310-634-980
SKU: hon-11129 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Crankcase covers CNC, Honda MSX125 GROM
€317.88
moet nog 501
TYGA no: APK2611370TA
SKU: MSX-10196 Categories: ALL products, Honda, MSX125 2013 - 2015, Shop, Various partsTank shrouds (grp) white with duct and grill, Honda MSX125 GROM
€147.50 €104.00
ank Shrouds, With Duct and Grille, (Pair), (GRP), MSX125 Grom. White. Painted to match your bike. Looks cool and makes your bike stand out from the crowd.
Pictures of bike show carbon version of this product (BPCX-7828) installed.
TYGA no: BPFX-7828 W
SKU: MSX-10217 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, Shop