Top triple clamp CNC black RACE, KTM RC390, 2022-
€442.15
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-2031
SKU: ktm-10216 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsExhaustset race Stainless steel motogp Silencer open, NC30 NC35
€1,035.91
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-0013.
This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0011
SKU: hon-10101 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Set upper/meter stay Race, Kawasaki Ninja 400 2018-
€292.88
Set, Upper/Meter Stay, Race, Ninja 400
This lightweight all aluminium upper cowling/meter stay replaces the big and complicated heavy steel one supplied with the bike and weighs a fraction of the original.
It is designed to be strong but minimal and supports both the fairing and instrument securely. It consists of a CNC machined aluminium clamp around the headstock and a lightweight aluminium fabricated stay which has been powdercoated for a durable finish.
It is simple and easy to install and in the event of an accident, it is easy to replace or repair. The instruments are mounted using the original stock mounts and it has a tab for holding the tipover sensor, also includes a stay to relocate the regulator.
Please note this is for circuit use only and can be installed with TYGA Performance ( BPFS-0175) or other race bodywork.
TYGA no: TYLY-0216
SKU: kaw-10153 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Seat cowling, stock GRP, Honda NSR250 MC21
€300.99
Seat Cowling (GRP), NSR250 MC21, Stock Shape, Street Assy.
This seat cowling is a direct replacement for the stock plastic seat cowling and is exactly the same shape. Unlike the plastic part, it doesn’t have joins between the sides and the tail piece.
There is no compromise in practicality though, and the panel features the luggage door and all mounting tabs for the taillight, duct shroud and luggage bracket. It can be used with stock Honda parts or TYGA parts.
Note: BPFR-9044 luggage door is included and can also be ordered separatel
TYGA no: BPFT-9044
SKU: hon-11222 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21Belly Pan, (GRP) RD250/350LC (4LO)
€181.29
Belly Pan, (GRP) RD250/350LC (4LO)
This belly pan faithfully compliments the classic lines of the legendary ‘Elsie’ along similar lines to the ones used back in the day, complete with the obligatory air scoops on either side. Although the design is traditional, the construction is modern and we have taken advantage of modern materials and techniques to bring you a better product than others on the market.
The belly pan itself is made from high strength epoxy resin and 200 gram glass fabric, making it flexible and light and attractive both on the inside and out. The mounting brackets are laser cut for precision and better aesthetics and they are covered by a plastic coating to give them a firm but kind grip on the frame rails. There is a great deal of adjustability built into the design and to allow our customers to mount this part in exactly the position they desire, based on other modifications such as exhausts, we supply it undrilled.
This product is supplied primed, however, will require minor preparation, before it’s ready for paint.
This product is suitable for stock and our exhaust system, EXCS-0044 which we offer for the RD350LC (4L0)
As well as this GRP (Glass reinforced plastic) version, we also supply a carbon version, BPCL-7032
Tank cover stock shape front red, Honda RVF400 NC35
€148.94
This is a GRP reproduction of the stock OEM front tank cover for the NC35. It can be used either with a stock tank in the normal way or if ordered with BPFX-9201(Red) to make a full painted tank cover for the NC35.
TYGA no: BPFX-9101 (Red)
SKU: hon-10516 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopSeat set with carbon race, Honda NSR250 MC28
€539.26
This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0006
SKU: hon-10240 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, By model, Honda, NSR250 MC28, ShopBar end weight (pair), Honda RC36-2 RC30 style
€26.03
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYLY-0324
SKU: hon-11533 Categories: ALL products, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various parts