Exhaust set slip on, oval stainless silencer with carbon cap, Honda MSX125 GROM
€394.13
Set, Pipe, Slip On, MSX125 2013-14, Stainless Oval/Carbon End Cap
Made in stainless steel with spring mounted hairline finish stainless silencer, and precision made CNC machined end cap. This system significantly saves weight and gives the best bang for the buck! This systme is supplied with a decibel killer which significantly reduces noise without adversely affecting performance and with installed, this is currently our quietest exhaust system available for the MSX125. ideal for owners not wishing to disturb the neighbours! (May not comply with noise regulations for some states and territories)
This system is supplied with a stainless steel sleeve silencer EXSL-1142
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is from installing the TYGA Slip On set (EXPS-0040).
A useful gain all through the range. Note, this test was done without the decibel killer installed.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0051
SKU: MSX-10278 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, ShopCarbon Rear hugger with chainguard, Suzuki RGV 250
€214.35
Rear Hugger/Chain Guard (Carbon), VJ22 RGV250
This product is designed to fit both the braced and ‘banana’ arm model VJ22s and is ideal for countries where regulations stipulate a chain guard for street bikes.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCH-9108
SKU: suz-10091 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, SuzukiScreen Clear, NSR250 MC18 ’89
€52.00
Screen Clear, 1989 NSR250 MC18, Kit.
1989 NSR250 MC18 screen clear
TYGA no: SCRE-0011
SKU: hon-10922 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, NSR250 MC18, Shop, Various partsRear sprocket aluminium gold, Honda RS250 NX5
€67.41
Sprocket, Rear , #520, Stock, Aluminium, (Gold) NX5 RS250
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0116-35T -40T
SKU: hon-10692 - 97 Categories: ALL products, By model, Honda, RS250R NF5 / NX5, Sprockets, SprocketsLower Cowling, Race, Carbon Unpolished, KTM RC390 WSS300
€382.54
Lower Cowling, Race, Carbon Unpolished KTM RC390 WSS300
Replacement Lower Cowling. WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFL-7531 (GRP)
BPCL-7531 (Carbon Clearcoated)
Triple clamp set CNC black, Honda VFR400
€673.59
CNC machined TYGA triple clamp set for your VFR400R/NC30.
These stylish, all aluminium triple clamps are a direct replacement for theVFR400R/NC30, and with the help of FEA testing not only do they look fantastic, but they perform!
They are delivered ready to fit with all bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1244
SKU: hon-10620 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30Seat cowling GRP, Honda NSR250 MC28
€348.13
Seat Cowling, (GRP), MC28 GP-T
We now make four versions of our NSR250 GP Race seat cowling for use for the MC28 in 8 different race and street sets. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0133 (GRP,Street)
BPFS-0134 (GRP Race)
BPFS-0135 (Carbon,Street)
BPFS-0136 (Carbon, Race)
The advantages of this seat cowling over stock include:
– use with rest of seat cowlign kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9033, BPFX-9333, BPCX-9033 and BPCX-9333 Undertray, NSR250 GP-T
TYLY-0108 Subframe, NSR250 GP-T
BPFX-9233 Seat Support, NSR250 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
TYGA no: BPFT-9133
SKU: hon-10465 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, NSR250 MC28, ShopCarbon meter cover silver, MC21/MC22/NC35/NC29/SC28
€37.83
Carbon Meter Cover MC21, MC22, NC35, NC29, SC28
Attractive carbon cover for MC21 meter assembly.
For fitment, simply remove adhesive backing and pop it on over the three foam retaining buttons.
Fits?Honda models as follows: CBR900RRN/RRP/RRR, RVF400 NC35, CBR400 NC29, CBR250 MC22.
TYGA no: BPCC-0005
SKU: hon-10378 Categories: ALL products, Bodywork and carbon, Carbon, CBR250RR MC22, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR250 MC21, RVF400RR NC35, Shop, Various parts, Various parts