Tank cover front, CBR250RR MC22
€101.04
This product is part of set BPFX-9125, (the other part being BPFX-9125R). This tank cover is designed to fit over a stock MC22 CBR250RR tank to prevent or cover up accident damage to the tank for example.
TYGA no: BPFX-9225F
SKU: hon-10211 Categories: ALL products, Bodywork, By model, CBR250RR MC22, Honda, ShopSilencer, Carbon/Carbon End Cap, Oval, Slip-On, RVF400, Assy.
€476.54
This easy to fit bolt on silencer replaces the stock heavy aluminium one on the stock system and is an alternative to the more expensive full race system. Constructed from lightweight carbon fibre with carbon exit cap, and aluminium mount cap, it fits in minutes using the original hardware. Stainless steel mounting clamp is provided when you purchase this product.
Note, this silencer may not be legal for some states and territories
Athena gasket kit complete set, Honda NSR250 1990 – 96
€65.29
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: P400210850268
SKU: alg-10417 Categories: ALL products, High performance, High performance, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partskey holder CNC black, Suzuki RGV 250
€121.39
Ignition Switch Holder, CNC Black, Suzuki RGV250 VJ22
This is a removable ignition switch/lock holder for our Suzuki RGV250 VJ22 top triple clamp. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-1046.
TYGA no: TYLY-1146
SKU: suz-10058 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiRubber ram airbox, Honda RS250 NX5
€9.13
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0221B
SKU: hon-11382 Categories: ALL products, High performance, Honda, RS250R NF5 / NX5, Various partsExhauststay, Suzuki RGV 250 Tyga
€61.59
This product is to be used exclusively with our TYGA Seat cowling kits for the VJ22. These include BPFS-0036, BPFS-0037, BPFS-0038.
This stay is designed to mount to TYLY-0028 subframe and secure the silencers of the the exhaust system. Will secure TYGA silencers and possibly others (we have no information on this) and because they are not ‘handed’ you can use them for both left and right sides. One TYLY-0029 is supplied in the kits and is sufficient if the motorcycle being fitted has the silencers stacked on the right side. (TYGA GP Style). If the motorcycle has side by side silencers with one exiting on the left and another on the right, it will be necessary to order an additional exhaust stay for the left side silencer. The subframe has securing points and all you need to do is to trim the undertray of the seat cowling in order to fit.
TYGA no: TYLY-0029
SKU: suz-10006 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Exhausts, RGV250 VJ22, Shop, Suzuki, Universal partsSilencer carbon round 43mm, Kawasaki ZXR250 2008 –
€284.06
Silencer, Carbon, Round, 43 mm. x 380 mm., Assy.
This silencer has polished stainless steel endcaps and a tough carbon tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2" external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0032Â
SKU: kaw-10023 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, Shop, SilencersSet, 4 pieces Headlight adjustment springs
€1.82
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: exsg-0005
SKU: hon-11524 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various parts