Upper/meter stay, Race, KTM RC125/200/390
€235.99
Upper/meter stay, Race, KTM RC125/200/390
This lightweight all aluminium upper cowling/meter stay replaces the heavy cast one supplied with the bike and weighs only a third of the original.
It is designed to be strong but minimal and supports both the fairing and instrument securely while saving 1 kg/2.2 pounds in weight. In addition to the weight saving, it is very easy to install and in the event of an accident, easy to repair. It has rubber mountings to support the instrument cluster and can be installed in a matter of minutes. Please note this is for circuit use only and can be installed with either stock KTM bodywork or TYGA Performance race bod
TYGA no: TYLY-0158
SKU: ktm-10086 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, CNC parts, KTM, RC 125/200, RC 390, Various parts, Various partsExhaust Hanger Stay, Pair, Carbon, RGV250, VJ23
€108.42
Rear Hugger/Chain Guard (Carbon), VJ23 RGV250
The VJ23 RGV250 is the only RGV250 model which does not have a rear hugger as standard and as a result, all the road filth and rain tends to collect around the rear shock and under side of the seat cowling. TYGA Performance have developed this carbon hugger as a solution to the dirt issue while making the swing arm/rear wheel part of the bike more attractive. Designed to fit onto the contour of the VJ23 swing arm’s fabrication and lock into position by a rub underneath, the TYGA hugger incorporates the rear chain guard too, using the chain guard’s mounting holes on the left to hold it securely in place. On the right side, it is held on by a cable tie through the rear brake line guide and at the front by an M4 bolt which is requires drilling and tapping of the swing arm by the customer to install this product.
IMPORTANT, note that due to the VJ23 never having the option for a rear hugger, there is no position provided on the swing arm to mount the hugger at the front and it is necessary to drill and tap an M4 hole in the swing arm and use a cable tie to provide a good level of support for the hugger. See photos 7 and 8 for details on what is required to install this product.
Complete with all fitting hardware.
Carbon tankshields set, Honda CBR600 2003-4
€211.27
These high quality carbon parts replace the cheap looking plastic original parts supplied by Honda
TYGA Performance aftermarket parts are of high quality and let your bike stand out from the crowd.
Carbon chain guard Dax
€104.89
Chain Guard, (Carbon) Stock Shape, Honda Dax. Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCX-7136
SKU: MKY-003 Categories: ALL products, By model, By product, Carbon, Dax and Chaly, Honda, ShopBodywork Set 2, GRP, RC36-2 RC30 Style, Race
€3,181.20
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFS-0239
SKU: hon-11481 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistHandle bar clamp left ” hinge type” black, KTM RC390 2014 -24
€106.61
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731L
SKU: ktm-10213 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsTriple Clamp Set, CNC Black, NC35 Forks to fit MC28
€588.29
Triple Clamp Set, CNC Black, NC35 Forks to fit MC28
This CNC machined triple clamp set has been modified from the ‘normal’ NC35 design to allow MC28 owners to fit NC35 forks to their machine.
The difference between the NC35 clamps and these is that we have replaced the steering shaft with one of suitable length for the MC28.
Carbon chain guard, Yamaha R1 2004-8
€137.88
Same shape as stock. To be used with our R1 carbon hugger BPCH-7002.
TYGA no: BPCX-7002
SKU: yam-10006 Categories: ALL products, Carbon, Shop, Yamaha, YZF-1000 R1 2007- 8