Clutch lever black, NC29 NC30 NC35
€29.95
CNC machined out of solid billet. Dog legged lever for Honda 4 stroke models such as NC23, 29, 30, 35 etc and similar models. (See alternative straight version for NSR250 and CBR250RR).
TYGA no: LEVC-9012Â
SKU: alg-10054 Categories: ALL products, CBR400RR NC23, CBR400RR NC29, CNC parts, CNC parts, CNC parts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Side cover (pair), NC30
€33.11
Side Covers in GRP for BPFT-9117
TYGA no: BPFC-9117
SKU: hon-10091 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Disc Brake, Rear, Ninja 250R 2008 -12
€92.27
Disc Brake, Rear, Ninja 250R 2008 -12
TYGA no: 41080-0114-11H
SKU: kaw-10187 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopFuel Tank, Carbon, VFR400 NC30
€1,444.49
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPCG-0005
SKU: hon-11228 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Carbon race airbox lid, Honda NSR250 MC21/MC28
€210.89
The stock airbox is restricted by the size of the inlet holes on the lid which limits the amountof power that can be unleashed from the NSR250. By replacing the stock airbox lid with the TYGA Performance version, the inlet to the airbox is more than doubled in size and the flow improved by having one large trumpet.
This product is a direct replacement for the stock one and uses all the stock hardware. It even has an ‘O’ ring groove so by removal and re-use of the stock airbox lid ‘O’ ring, a perfect seal with the airbox can be retained. A mesh is supplied in the airbox to hold the stock air filter securely in position.
As well as potential power improvements over the stock airbox, there is no denying it certainly looks a lot more trick than the Honda one too!
TYGA no: BPCX-9010
SKU: hon-10323 Categories: ALL products, Carbon, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopTriple Clamp Set, 3D, CNC Silver, CBR600RR to fit MC21/MC28
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3307
SKU: hon-11252 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28, Stock list, all modelsRacing step CNC silver, NC30 NC35
€299.27
New improved design! Designed in-house by TYGA Performance using AutoCAD software, these CNC machine- made step kits are made from top grade aluminium. Now uses carbon heel guard on left side hanger (the right side carbon brake/heelguard shown in the pictures is an optional extra and can be ordered with your step kit, part number BPCC-9002).
Now includes rear brake light switch provision.
This step kit moves the peg position back 5 mm. and up 20 mm. from standard. Pitch of hanger frame mounting holes is 72 mm.
Reverse schifting is possible with this race step kit.
TYGA no: STAA-0003
SKU: hon-10108 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, RVF400RR NC35, Shop, VFR400RR NC30** USED ** front fork NSR250 MC28
€770.00
** USED ** wire harness Suzuki RGV250 VJ22
GERMAN type, different solenoid system.
*** no returns on used parts ***
TYGA no: used
SKU: used-1000-2 Categories: ALL products, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, used parts, used parts, used parts, used parts Tags: aprilia rs250 suzuki RGV250., Cone welded racing pipes