Stay maggot silencer, Honda MSX125SF GROM
€21.25
Stay, Maggot Silencer, MSX125SF, High Level Exhaust
This product allows for the use of a TYGA Performance high level full race system with the 2016 second generation MSX125SF Grom. Some small modification to the rear fender is required to allow for installation, but once installed, the stay is neat and tidy and unobtrusive. This product is suitable for, and included with, the following model exhaust:
EXPS-0065 Set, Pipe, Full Race system, MSX125SF Grom, Moto Maggot
Note: This product can be ordered individually and used for customizing your bike with any high level exhaust. See also similar product BPSY-0177 which has the mounting holes further toward the rear and is used with our oval silencer full race system EXPS-0066 and EXPS-0067.
TYGA no: BPSY-0175
SKU: MSX-10342 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, ShopKevlar stone guard, Honda RS250 NX5
€89.56
Stone guard, Kevlar, NX5 RS250R
Kevlar replacement part for Honda /HRC part number: 50819-NX5-700 used in modelyears 1993-1994
TYGA no: BPKC-0029
SKU: hon-10689 Categories: ALL products, Bodywork and carbon, By model, By product, Carbon, Honda, RS250R NF5 / NX5, Shop, Various partsSeat set with carbon street, Honda NSR250 MC21
€714.98
This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21 but also an MC28 fitted with an MC21 fuel tank. The kit comprises of the parts shown below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0003
SKU: hon-10225 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, ShopBodykit complete MiniRacerXtreme, Honda MSX125 GROM
€1,540.86
Bodywork Set, (GRP), MRX, MSX125 GromThis kit is the ultimate modification for your MSX125 Grom converting it to a mini racer for the road or track depending on how the mood takes you. The kit is comprehensive and is supplied with all mounting hardware and components including, headlight, handlebars, top triple clamp and mirrors*.The panels are made from high quality GRP using high quality epoxy resins for strength and lightness and are primed ready to apply paint. The shape lends itself to most liveries and ideal for promoting your business or race team.With improved ergonomic and aerodynamic performance, this kit will increase top speed and agility as well as give a whole new riding experience for the MSX125 Grom. Ideal for buddying road racers for honing racecraft and riding skills, or just a fun project to stand out from the crowd, the MRX will put a smile on everyone’s face.*Note, turn signal indicators, tail tidy, front fender are not included with kit but are available on this site. We recommend installation of rear sets and exhausts but they are not strictly necessay.Our MRX set only fits the first model MSX 2013-16<iframe width= 560 height= 315 src= https://www.youtube.com/embed/8eiU-sMhpRI frameborder= 0 allowfullscreen></iframe>
Silencer, Carbon, Round/Carbon End Cap Slip On, RVF400, No Fittings
€457.99
This easy to fit bolt on silencer replaces the stock heavy aluminium one on the stock system and is an alternative to the more expensive full race system. Constructed from lightweight carbon fibre with carbon exit cap, and aluminium mount cap, it fits in minutes using the original hardware. Stainless steel mounting clamp is provided when you purchase this product.
Note, this silencer may not be legal for some states and territories
TYGA no: EXSL-0122
SKU: hon-10860 Categories: ALL products, Exhausts, Exhausts, Honda, RVF400RR NC35, Stock list, all modelsBracket front brake CNC black 84mm Brembo, Kawasaki Ninja 400
€46.98
Bracket, Front Brake, 40 mm Brembo Conversion, Black, Kawasaki Ninja 400
CNC machined brake caliper support for your Kawasaki Ninja 400.
Designed and machined in house. Crafted from 6061 T6 aluminium, this caliper support allows you to fit a Brembo Goldline P4 30/34 caliper (40mm mounting pitch) to your Ninja 400.
For race or track day use we recommend upgrading your master cylinder for ultimate stopping power.
Torque Setting: 35Nm
TYGA no: TYLY-1210
SKU: kaw-10154 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Carbon swing arm cover, Suzuki RGV250 VJ22
€305.44
These lightweight carbon covers fit over the stock swing arm on the ‘banana arm’ swing armversion of the VJ22.
Very popular product, many swing arms have scratches, so with this beautiful carbon product you get rid of the scratches and also get that GP look.
Note, this product will not fit the later braced type swing arm
TYGA no: BPCC-9020
SKU: suz-10086 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, SuzukiDecal, Fuel Tank, Kawasaki, Silver, Ninja 250R 2008 -12
€3.00
Decal, Fuel Tank, Kawasaki, Silver, Ninja 250R 2008 -12
TYGA no: 56054-0054
SKU: kaw-10193 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, Shop