Set pipe, Full race with round stainless silencer, Kawasaki ZXR250/300 2013 –
€548.01
.Set, Pipe, Full Race System, Ninja 250R/300R, Round Stainless SilencerThis full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.(May not comply with noise regulations for some states and territories and may exceed noise regulations for some ciircuits)This system is supplied with a stainless round silencer.<iframe width= 560 height= 315 src= https://www.youtube.com/embed/aFjJq-crAQ8 frameborder= 0 allowfullscreen></iframe>
Please see the two dyno graphs from Kawasaki Racing Australia who independently tested the TYGA system against the stock system and also against a well known competitor. The figures clearly show the advantages of installing a TYGA full race exhaust whether it be for street or for race use.Graph 1 shows 8.5% more power over stock just from installing the TYGA Full systemGraph 2 shows the peaks are very similar but look how the TYGA system has more power everywhere else, up to 10% more power in the important 9,000 to 10,000 range. The Leo Vince exhaust was mapped for 98 octane and the Tyga for 91 which should give an advantage to the Leo.
TYGA no: EXPS-0047
SKU: kaw-10030 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -, ShopCoolant Spigot (pair) Suzuki RGV250 VJ21/22, Aprilia RS250
€143.61
Coolant Spigot (pair) Suzuki RGV250 VJ21/22, Aprilia RS250
These lightweight CNC machined billet aluminium spigots replace Suzuki part numbers 17872-36A01, 09280-20006 and 0211206167, and can be used on the Suzuki VJ21 and VJ22 RGV250 models and also will fit the Aprilia RS250.
This product is sold as a set of two Spigots with O-rings installed and 4 mounting bolts. Note, you can also order single units, replacement O-Rings and bolts (product codes TYLY-0238(p) EXOR-0035 and BHSS-0615)
TYGA no: TYLY-0238
SKU: alg-10329 Categories: ALL products, Aprilia, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Various parts, Various parts, Various partsCarbon set, Suzuki RGV 250
€332.45
Carbon set, Suzuki RGV 250
A set contains:
Front fender
Rear Hugger
Update your bike with these beautiful carbon products, same shape as original. Fits in minutes.
Buy a complete set and it saves you money.
PLEASE NOTE: all ” TYGA” logo stickers on the carbon products can be easily removed because it is applied last above the clearcoat finish.
TYGA no: BPFS-0058
SKU: suz-10002 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, SuzukiCarbon Number board miniRacerXtreme, Honda MSX125 GROM
€65.29
Number Board, (Carbon) MiniRacerXtreme, MSX125 Grom
This product fits over the front of the fairing on the MiniRacerXtreme to tranform the fairing from street to race. Easy installation and can be used with or wothout the headlight installed.
Carbon undertray TYGA, Aprilia RS250
€120.42
his is the all GRP undertray used in the GP style seat cowling kits for the Aprilia RS-250 kits BPFS-1102
This product is suitable as a replacement in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the Aprilia RS-250
To be used with seat cowling BPFT-9030 and BPCT-9030
TYGA no: BPCX-9030
SKU: apr-10076 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopCarbon side cover (pair), Aprilia RS125 (2007-12)
€299.09
Fits all model Aprilia RS125. Weight approx. 0.125 kg.
Update your bike with this great carbon product, direct replacement of the original part
TYGA no: BPCC-7307
SKU: apr-10108 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS125, ShopCarbon exhaust chamber guard, KTM SX250/SX300
€160.51
Exhaust Chamber Guard (Carbon), KTM250/300 Off-road
This tough carbon exhaust guard is designed to fit snuggly over the stock KTM250/300 off-road models from 2005 to 2015. Constructed using high strength epoxy resins and with a layer of kevlar on the inside for extra protection, this guard is the best on the market.
Fits in minutes
Supplied with mounting hardware as shown in the photo
Undertray MiniRacerXtreme, Honda MSX125 GROM
€65.30
Bodywork Set, (GRP), MRX, MSX125 GromThis kit is the ultimate modification for your MSX125 Grom converting it to a mini racer for the road or track depending on how the mood takes you. The kit is comprehensive and is supplied with all mounting hardware and components including, headlight, handlebars, top triple clamp and mirrors*.The panels are made from high quality GRP using high quality epoxy resins for strength and lightness and are primed ready to apply paint. The shape lends itself to most liveries and ideal for promoting your business or race team.With improved ergonomic and aerodynamic performance, this kit will increase top speed and agility as well as give a whole new riding experience for the MSX125 Grom. Ideal for buddying road racers for honing racecraft and riding skills, or just a fun project to stand out from the crowd, the MRX will put a smile on everyone’s face.*Note, turn signal indicators, tail tidy, front fender are not included with kit but are available on this site. We recommend installation of rear sets and exhausts but they are not strictly necessay.Our MRX set only fits the first model MSX 2013-16<iframe width= 560 height= 315 src= https://www.youtube.com/embed/8eiU-sMhpRI frameborder= 0 allowfullscreen></iframe>