Carbon kit, Fairing Set, Honda NX5 1993 RS250R (early model style)
€2,267.12
Kit, Fairing Set (Carbon), Honda NX5 RS250R (1993 Style)
Complete Carbon Bodywork kit which consists of the following products:
Upper Cowling Race, (Carbon) NX5 RS250R (1993 Style) (BPFU-9236)
The carbon upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped.
To be used with carbon lower cowling BPCL-9136.
Lower Cowling, (Carbon) NX5 RS250R (1993 Style) (BPFL-9136)
The carbon lower fairing is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.
To be used with upper cowling BPCU-9036
Seat Cowling Race (Carbon) NX5 RS250R (1993 Style) (BPFT-9236)
The carbon seat cowling is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock subframe as far as we can tell. It is easy to install, is strong and crash resistant.
Made to order, takes approx 1 to 2 weeks to be ready for shipping
This product contains the following items:
TYGA no: BPFS-0181
SKU: hon-10953 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon cover side (pair), Honda MSX125 2021-
€158.99
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCX-7348
SKU: msx-10504 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopInner cowling GRP, stock shape “painted red”, RVF400RR NC35
€157.94
Seat Cowling, (GRP), NC30/NC35 GP-T
This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0148 (GRP, NC30)
BPFS-0149 (GRP, NC35)
BPFS-0150 (Carbon, NC30)
BPFS-0151 (Carbon, NC35)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T
TYLY-0133 Subframe, NC30/NC35 GP-T
TYLY-0130 Batterybox NC30/35 GP-T
BPFX-9234 Seat Support, NC30/NC35 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
TYGA no: BPFC-0038 painted
SKU: hon-11297 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, RVF400RR NC35Airbox GRP, A kit, Honda RS250 NX5
€480.84
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPFX-0008
SKU: hon-11312 Categories: ALL products, High performance, Honda, RS250R NF5 / NX5, Various partsChain Slider, MC 21
€122.65
Chain Slider, MC 21
TYGA no: 52170-KV3-830
SKU: hon-11092 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC21Belly Pan Carbon, Yamaha RD250/350 (4LO)
€276.10
Belly Pan, (Carbon) RD250/350LC (4LO)
This belly pan faithfully compliments the classic lines of the legendary ‘Elsie’ along similar lines to the ones used back in the day, complete with the obligatory air scoops on either side. Although the design is traditional, the construction is modern and we have taken advantage of modern materials and techniques to bring you a better product than others on the market.
The belly pan itself is made from 200 gram plain weave carbon coated in three layers of UV resistant PU clearcoat, making it attractive and ready to install. The mounting brackets are laser cut for precision and better aesthetics and they are covered by a plastic coating to give them a firm but kind grip on the frame rails. There is a great deal of adjustability built into the design and to allow our customers to mount this part in exactly the position they desire, based on other modifications such as exhausts, we supply it undrilled.
This product is suitable for stock and our exhaust system, EXCS-0044 which we offer for the RD350LC (4L0)
As well as this carbon fiber version, we also supply a GRP (glass reinforced plastic) version, BPFL-7032
Upper Cowling, Carbon, NX5 RS250R (1995 NSR250 Style)
€855.35
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Requires screen SCRE-0173
TYGA no: BPCU-9336
SKU: hon-10976 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopTop Triple clamp CNC silver kit, Honda NSR250 MC18/MC21/MC28
€218.46
Top Triple Clamp Set, CNC Silver, MC21
CNC machined TYGA top triple clamp with detachable ingitionswitch/lock holder for your NSR250.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder TYLY-0141 is positioned to allow use of the steering lock, but can be removed for race use.
TYGA no: TYLY-0441Â
SKU: hon-10270 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, Shop