fairing set race RC211V, NC30 kit
€807.58
Fairing set race RC211V, NC30 kit
This set of bodywork comprises of the parts shown in the picture which are also available separately
*A clear screen is provided.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0012
SKU: hon-10064 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Silencer aluminium round /carbon end cap 380mm (4 stroke) 2
€271.40
Silencer, Aluminium/Carbon End Cap, Round, 2 x 380 mm., Assy.
This silencer has a tough anodized aluminium tube and carbon exit cap for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0140
SKU: alg-10136 Categories: 4 stroke exhaust sets, ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30, VFR750F Gen 4, 94-97Carbon tank protector, Suzuki RGV250 Vj21
€180.64
Carbon Tank Protector, Suzuki RGV250 VJ21
This real carbon protector is designed to fit snuggly on the RGV250 VJ21 fuel tank and will prevent scratches from zippers etc. It will also add some individual style to your pride and joy.
TYGA no: BPCC-9037
SKU: suz-10143 Categories: ALL products, Bodywork and carbon, RGV250 VJ21, Shop, Suzuki, Various partsCarbon fuel tank stay front, Suzuki RGV250 VJ21/VJ22
€60.24
Fuel Tank Stay, Front, Carbon, RGV250 VJ21/VJ22
This lightweight corrosion proof carbon stay replaces the stock item that the bike is supplied with.( Suzuki OE part nr: 44521-32C00-000.
It uses the stock mounting screws and can installed in seconds.
Fits Suzuki RGV250 VJ21 and VJ22
TYGA no: BPCC-0062
SKU: suz-10144 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, RGV250 VJ21, RGV250 VJ22, Shop, Suzuki, Various parts, Various partsRacing step kit (adjustable) ninja 400
€529.03
Racing Step Kit, (Adjustable), Ninja 400
Designed in-house by TYGA Performance using the latest CAD/CAM software, these CNC machine-made step kits are made from top quality aircraft grade aluminium. Complete with carbon heelguard on left and right hanger.
Street/Race shift possible by reversing the gear change arm. No other modification necessary other than adjustment of the link rod.
Peg position is multi adjustable. The low/forward position is 15mm back and 15mm up from the standard position. Adjustable in 15mm increments to a maximum of 60mm back and up from the standard position.*
Brake light is not used on these race steps, but a simple inline pressure switch may be used.
The side stand mounting does not need to be removed.
Fitting the TYGA Step Kit for the Kawasaki Ninja 400 requires that the swingarm axle be removed from the machine, which can render the vehicle unstable. We recommend using a rear paddock stand for stability, and having an assistant can be very useful during removal and fitting of the axle.
* Peg position can be adjusted to ten positions by 2x M8 bolts attaching the hanger plate to the main plate. After a position change, adjustment of the gear change arm and link rod length will be necessary. For low/forward positions you will need to use the standard link rod.
For your safety, please ensure all fasteners are tight before use, and we recommend the use of thread locking agent (such as Loctite 242) on the 2x M8 bolts.
Lower Cowling, GRP, RC36-2, RC30 Style, Race, Assy
€250.67
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFL-7149
SKU: hon-11484 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistUpper Cowling (Street GRP), MC21, Stock Shape, Assy.
€132.42
Fiberglass replacement of the OEM shape upper
Compatible Parts:
MC21 and MC28 OEM lower cowling, Tyga lower cowling: BPFL-0001
Tyga Performance Accessories:
Requires screen SCRE-0016, SCRE-0017, SCRE-0018, SCRE-0019 and SCRE-0020
TYGA no: BPFU-0006
SKU: hon-10830 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Honda, NSR250, NSR250 MC21Racing step kit CNC silver, Honda CBR250/ CBR300
€351.04
Designed in-house by TYGA Performance using the latest CAD/CAM software, these CNC machine-made step kits are made from top quality aircraft grade aluminium. Complete with carbon heelguard on left and right hanger.
Designed for, and used by the AP Honda team in the FIM Asian Road Racing Championship, Sport Production 250cc Class. Now available to you.
Race shift possible by reversing the gear change arm (STGA-0002). No other modification necessary.
Peg position is 68/80mm. up and 48/60mm. back*. Pitch of hanger to frame mounting holes is 80mm.
Note STAA-0023 is for race use only and requires removal of ABS system. No brake light switch provision is provided.
* Brake hanger plate must be moved together with peg for position changes. Please use thread locking agent on all bolts.
TYGA no: STAA-0023
SKU: hon-10490 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, Honda, Shop