Tyga Step Kit Replacement Link Rod, 238mm
€16.92
Tyga Step Kit Replacement Link Rod, Male, 238 mm.
Uses M8x1.25 thread in one end and M8x1.25 L/H thread in the other. 238mm in length.
Silencer GP-T, Carbon/kevlar 60mm, Two Stroke, Spring Mounted
€124.31
Silencer, GP-T, Carbon/kevlar, Two Stroke, Spring Mounted, Assy.
To complement our NX5 exhaust chambers, we wanted a silencer design which was both functional and classic. The result is this TYGA Performance GP-T style silencer. Available in three models, with carbon, carbon/Kevlar and aluminium outer tubes and with stainless end caps, it is mounted by two springs (included) for ease of installation and for looks. The silencer is strong and easily rebuildable, using rivets to assemble. Remember to order two silencers for every twin cylinder exhaust system! Also see EXSL-0069 and EXSL-0070.
Note, this silencer is only compatible with the NX5 RS250R exhaust system and cannot be mounted on other exhaust chambers in our product range.
TYGA no: EXSL-0069
SKU: hon-10902 Categories: ALL products, CNC parts, Exhaust, Honda, RS250R NF5 / NX5, ShopGear 6th drive z=25 no.5, RGV250/RS250
€104.93
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Triple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 Forks to fit NSR250 MC18
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3300
SKU: hon-11269 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsSet full race system under belly with long stainless silencer + carbon side cover, Honda Monkey 125 2018- BP5624
€731.40
Set, Pipe, Full System, Underbelly, Monkey 125, Stainless Oval/Carbon End Cap, Long, with Carbon Side Cover
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted stainless silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).
Note that once the stock system has been removed from the Monkey, there is an empty space under the seat on the right side. This set includes Carbon Side Cover BPCC-7142R which has been designed to mirror the left side cover. This will fill in the gap under the seat and complete the transformation. Refer to photos of the exhaust installed for more details.
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0107) with no other changes to the stock bike.
A useful increase in peak power and further gains could probably be had with remapping etc.
Similar Products:
Please also see:
EXPS-0108 Stainless, Underbelly, with short silencer
Bracket front brake CNC silver 40mm Brembo, Yamaha R25/ R3
€51.61
Bracket, Front Brake, 40 mm Brembo Conversion, Silver, Yamaha R25/R3
CNC machined brake caliper support for your Yamaha R25/R3.
Designed and machined in house. Crafted from 6061 T6 aluminium, this caliper support allows you to fit a Brembo Goldline P4 30/34 caliper (40mm mounting pitch) to your R25/R3.
Tried and tested with the standard master cylinder and standard brake lines with great performance.
For race or track day use we recommend upgrading your master cylinder for ultimate stopping power.
Triple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, CBR600RR Forks to fit MC18
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3303
SKU: hon-11247 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsBelly pan (GRP) unpainted, Honda MSX125 GROM
€149.20
Belly Pan, (GRP), MSX125, unpainted. Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
High quality mounting hardware provided and easy to install.
We also offer the same product with painted and with carbon, see BPFL-7128 W/R/Y/B and BPCL-7228 shown in the photos
Important. This product needs painting and is only provided with a PU primer finish
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href="{{media url="wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf"}}" target="_self">Click here for PDF</a></p>
TYGA no: Â BPFL-7128
SKU: MSX-10188 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop