Carbon Seat set RVF, NC35
€912.34
Stock shape seat cowling with or without taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad. Please specify if you would like taillight holes and taillight mount made for no extra charge.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
This panel can also be ordered in kit BPFS-0066 complete carbon set NC35, street, and BPFS-0068 complete carbon set NC35, race.
TYGA no: BPCT-9004
SKU: hon-10139 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopHandlebar Clamp, Right, Silver, CBR250
€92.83
Replacement Right handlebar clamp for handlebar set TYLY-0669
Exhaustset stainless steel carbon silencer round, Honda CBR125
€479.79
This full race system has been specifically designed for the CBR125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too!
TYGA no: EXPS-0006Â
SKU: hon-10277 Categories: 4 stroke exhaust sets, ALL products, CBR125R/CBR150R 2004-10, Exhausts, Honda, ShopCarbon front fender sport, universal
€257.47
Front fender stock shape, Honda RS250 NX4-NX5
Same shape as original
Compatible Parts:
All Tyga Performance and Honda OEM panels.
Tyga Step Kit Replacement Link Rod, Female, 215 mm.
€13.99
Tyga Step Kit Replacement Link Rod, Female, 215 mm.
Uses M6x1 female thread in one end and M6x1 L/H female thread in the other. 215mm in length.
Temp gauge “race”, Honda 1/8″ NPT
€23.55
Temp Gauge, Race, Honda 1/8″ NPT
Stand alone temperature gauge for race use. Ideal for monitoring engine coolant temperature.
Pre-fitted with 1/8″ NPT adapter. Just remove the standard temperature sensor and screw in this replacement.
Displays temperature in Centigrade, up to 99.9C
Race use only. No back light function.
Supplied with 2x LR44 batteries (not fitted).
**NOTE** Some machines may use the temperature reading from the standard sensor, in which case alternative mounting may be required.
Fits:
RVF400 NC35
VFR400 NC30
NSR250 (All models)
NSR150SP
CBR400RR NC29
Also fits all Honda Motorcycles who are using thermo units with OE part numbers 37750-PC1-004 and 37750-KV3-951
TYGA no: TELC-0004
SKU: alg-10324 Categories: ALL products, By model, CBR400RR NC29, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Seat Pad (reproduction), HRC RS125 NX4
€22.73
Holder, Carbon, Brake Hose, NSR500V Style
This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.
It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.
Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.
TYGA no: BPSP-0009
SKU: hon-11421 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR500V NX6, RS250R NF5 / NX5, RS250R NXA, Various partsStep adjuster plate, NSR250 MC21/MC8
€86.53
Adjustable Footpeg Hanger Plate (Pair), MC21/28. These CNC machined plates are designed to take the stock Honda hanger plates allowing for three additional positions higher and further back over the stock position. See photos below for before and after with the middle position fitment. Also note fitment of the two bushes supplied for the left side due to the left hanger positions top and bottom not being in the same vertical plane.
Ideal for trackdays and those weekend ‘toe dragging’ hoons!
Positions: Back 20mm. Up 10mm, 20mm & 30mm
Includes all fitting hardware and extended link rod.
TYGA no: STAA-0018
SKU: hon-10367 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC21, NSR250 MC28, Shop