Rear sprocket aluminium gold, ZXR400 / ER6
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0112-42T - TYSR-0112-47T
SKU: kaw-10049 - kaw-10054 Categories: ALL products, By product, ER6N-F 2009-11, Kawasaki, Sprockets, ZXR400LFront fender “stock type” , Honda VFR750 RC30
€111.13
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Passenger Seat Cover GRP, NC30, Stock Shape, Assy, Painted Type 1
€145.40
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFX-0021type1
SKU: hon-11409 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Front fork overhaul kit, Honda MSX125 GROM
€55.41
Overhaul Kit, MSX125 Grom
Description:
Special fork disassembly / assembly tools for MSX125 Grom front forks.
31mm fork clamps with hole location will hold the fork stanchions securely, during overhaul.
14mm Hex wrench ideally cut to length to fit through the hole in the fork lowers to reach the socket head cap.
TYGA no: TYTO-0010
SKU: MSX-10326 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Tools, Various parts, Various partsComplete Bodykit set Type 2 white, Honda MSX125 GROM
€329.98
Complete Bodywork Set, MSX125, Type 2 Pearl Himalayas White Scheme. Transform your bike! Easy and fun to install. With this product, you can afford to have a change of clothes for your beloved MSX125/Grom.
This set comprises of a complete set of all the OE Honda panels and decals shown in the photos below for the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets. These are all genuine Honda products and not nasty Chinese knockoffs!
All the products listed in this set are individually available.
TYGA no: BPFS-7028W
SKU: MSX-10111 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopSet exhaust, race system double maggot , KTM RC390 2014 – ’21
€866.32
.Set, Pipe, Race System, RC390, Stainless Moto MaggotUpdate your bike with this great TYGA performance, KTM power part!!.Set, Pipe, Race System, RC390, Stainless Moto MaggotModel 2017This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage. This system increases performance, saves weight and enhances the looks of the bike. The system is not supplied with decibel killers, and may not meet noise regulations in your area.CompatiblityThis exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.Please also see EXPS-0091 for similar system with oval silencersPlease refer to dynographA) All Standard.B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition mapC) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition mapVery useful gains especially in the mid range for both B) and C), for much stronger acceleration.The silencer was full bore.NEW! for the 2017 model we added the EXPT-0003:Header exhaust, designed for unimpeded flow. Unlike the stock KTM header for the RC390, which has creases and dents to fit between the frame and engine, the TYGA header has been carefully fabricated to retain the round cross sectional area throughout, to avoid turbulent gas flow. Complete with Lambda sensor bung in the original position.Compatible with the following exhausts:Compatible with 2014-2016 KTM stock exhaust and other systems using the stock KTM header for those years.Compatible with 2014-2016 TYGA exhaust systems EXPS-0061 and EXPS-0062Included with 2017 on TYGA exhaust systems EXPS-0091 and EXPS-0092<iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0092
SKU: ktm-10092 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopSection, Header, Left, Stainless, Yamaha R25/R3
€119.01
Section, Header, Left, Stainless, Yamaha YZF-R25 and YZF-R3
Used with EXPS-0072, EXPS-0073, EXPS-0074 and EXPS-0075.
Exhaust Chamber, Right, Stainless Steel, MC21
€317.17
This is the bare right side replacement chamber in stainless steel for EXCS-0005A suitable for EXCS-005A and EXCS-006A for the MC21